25.[CLRG]
This command clears the members for a single group or for all groups. The clear command restores the cards to default settings and is the equivalent to sending the [CLR] command to each individual card.
NOTE: Since this command is sending the [CLR] command to its group members, each card will display its own reset message, if any.
Command Format: [CLRGkUi]
Gk = Group ID (k = # from
Ui = Unit ID (i = # from
Example:
1)To clear group 1 of Unit ID 0, send the [CLRG1] command. This command clears the members for the specified group only.
2)To clear all groups of Unit ID 1, send the [CLRG[U1] command.
26.[CLM]
This command removes the members in a group and leaves the group empty. It is equivalent to sending the [RMGkUi] command without card references.
Command Format: [CLMGkUi]
Gk = Group number (k = # from
Ui = Unit ID (i = # from
Example:
Group 5 of Unit ID 1 contains the cards in slots 1, 2 and 19. Read the member data for group 5 of Unit ID 1. Send the command [RDG5U1] and receive the following feedback:
G1=C1C2C19
Now, clear group 5 by sending the command [CLMG5U1]. Reread the member data as above and note the following feedback:
G1=EMPTY
7.3SUMMARY OF COMMANDS Card Commands
1)[VER] Receives software version
2)[C] Receives status of the card
3)[CnS] Save card settings
4)[?] Show status/ general information
5)[STA] Enable/disable auto feedback
6)[SDL] Read Sync Delay settings
7)[SDLm] Set Sync Delay settings
8)[SIGI] Input signal detect
9)[SIGO] Output signal detect
10)[ON] Turns on one or more outputs for a single card or a group of cards
11)[OFF] Turns off one or more outputs for a single card or a group of cards
12)[…S] Save the command configuration
13)[…F] Provides feedback upon sending
14)[…P] Sets the path, preload for [SW]
15)[SW] Switch preloaded output buffer
16)[IO] Connects inputs to the outputs
17)[CLR] Reset card to default values
18)[MAT] Define the matrix size
19)[TEST] Test internal memory IC's
20)[HELP] Display available commands Group Commands
21)[WR] Groups multiple cards
22)[RMC] Remove members from a group
23)[RMG] Remove one or more groups
24)[RDG] Displays group members
25)[CLRG] Clears group members
26)[CLM] Removes an entire group
17 |