Chapter 1: Overview
SD Card Slot
All of the x600 Series Switches have an SD card slot which is designed for an SD card which stores configuration files and AlliedWare PlusTM Operating System Software image files. See Figure 11.
x600-24Ts/X
SD | READY |
BUSY 
FAULT
1 3 5 7 9 11 13 15 17 19 21R 23R
L/A
D/C
L/A
D/C
2 4 6 8 10 12 14 16 18 20 22R 24R
1318
Figure 11. SD Card Slot
An SD card can make it easier for you to upgrade the files on a switch or transfer files between x600 switches. See Figure 12.
LOCK
SD Memory Card
1319
Figure 12. SD Card
Note
An SD card is not required for normal operations of the switch.
The x600 switches support the SD card that is available from many vendors.
To insert an SD card, position it so that the manufacturer’s brand label is facing up and press it into the slot until it is flush with the front of the chassis. The SD card is self-ejecting. To remove the SD card, press the card toward the x600 switch and the SD card pops out.
For information on how to transfer files to and from a SD card, refer to the
AlliedWare PlusTM Operating System Software Reference Guide.
24