Chapter 2: Installing the Hardware
Unpacking a Switch
To unpack a switch, perform the following procedure:
1. Remove all components from the shipping packages.
Note
Store the packaging material in a safe location. You must use the original shipping material if you need to return the unit to Allied Telesis.
2.Place the switch on a level, secure surface.
3.Make sure the following components are included in your switch package. If any item is missing or damaged, contact your Allied Telesis sales representative for assistance.
One x600 Series Layer 3 Gigabit Ethernet Switch
Two
Eight flathead Phillips
AC power cord (Americas, Australia, EU, Japan, and UK only)
AC power cord retaining clip
Management cable for local management
38