Allied Telesis C613-02013-00 manual Install Information

Page 21

Operating the Switch

21

Install Information

The INSTALL module is responsible for maintaining install information and loading the correct install at boot. A release is a binary file containing the code executed by the switches CPU. There may also be a patch file, and additional binary file that modifies the original release file. An install is a record identifying a release and an optional patch. Three installs are maintained by the INSTALL module, temporary, preferred and default.

The default install is the install of last resort. The release for the default install can not be changed by the manager and is always the EPROM release. The patch for the default install may be set by the manager.

The temporary and preferred installs are completely configurable. Both the release and an associated patch may be set. The release may be EPROM or a release stored in FLASH.

The three different installs are required to handle the following situations:

■A default install is required to handle the case when only the EPROM release is present.

■A temporary install is required to allow a release and/or patch to be loaded once only, in case it causes a switch crash.

■A preferred install is required because the default install can not be anything other than the EPROM.

The install information is inspected in a strict order. The temporary install is inspected first. If this install information is present, the temporary install is loaded. At the same time, the temporary install information is deleted. This ensures that if the switch reboots immediately as the result of a fatal condition caused by the temporary install, the temporary install will not be loaded a second time.

If there is no temporary install defined, or the install information is invalid, the preferred install is inspected. If present, this install is loaded. The preferred install information is never deleted.

If neither temporary nor preferred installs are present, the default install is used. The default install will always be present in the switch, because if, for some reason, it is not, the INSTALL module will restore it.

The preferred install should not be set up with an untested release or patch. It is advisable to install new releases or patches as the temporary install, and when the switch boots correctly, to then set up the preferred install with the new release or patch.

To change the install information in the switch, use the command:

SET INSTALL={TEMPORARYPREFERREDDEFAULT} [RELEASE={release-nameEPROM}] [PATCH[=patch-name]]

The INSTALL parameter specifies which install is to be set. The INSTALL module is responsible for maintaining install information and loading the correct install at boot. An install is a record identifying a release and an optional patch. Three installs are maintained by the INSTALL module, temporary, preferred and default.

Rapier Switch Software Release 2.2.1 C613-02013-00 Rev A

Page 20 Page 22
Image 21
Page 20 Page 22
Contents User Guide Page Contents Documentation Roadmap Chapter Why Read This User Guide?Technical support Where To Find More InformationSwitching Features What Can the Rapier Switch Do?Routing Features Advanced Feature Licence AT-RPFL3Upgrade Optional Features Command Line Interface Simple SwitchingEntering Commands Giving the Switch an IP AddressSET Password LoggingEnable AT-RPFL3Upgrade Feature Licence Enable GUIEnabling the GUI Starting the GUI Graphical User InterfaceNavigating Monitoring User Privileges File SubsystemShow File Show System Online CLI HelpSaving Configuration Entered with the GUI Configuration ScriptsDram NoneEditor Saving Configuration Entered with the CLIInstall Information Show Install Delete InstallReleases and Patches into the Switch Load METHOD=HTTP DESTINATION=FLASH Example Install Software Upgrade for Rapier SwitchEnable Snmp Snmp and MIBsShow Load Show Snmp Enable Snmp AuthenticatetrapEnabling and Disabling Switch Ports Switch PortsISO8802-3 Csmacd EnabledOFF STPAcceptable Frames Types Autonegotiation of Port Speed and Duplex ModeSELECT=MACSRCMACDESTMACBOTHIPSRCIPDESTIPBOTH Port TrunkingShow VLAN=ALL Packet Storm Protection Port Mirroring Enable Switch Mirror Disable Switch Mirror ADD Switch L3FILTER MatchINTRUSIONACTION=NONEDISCARDTRAPDISABLE Port securityVirtual LANs Example output from the Show Switch Port Intrusion commandRapier Switch User Guide Creating VLANs Without Vlan Tags Static and dynamic VLANsMarketing Vlan Switch Training Vlan Trunk ports GarpParameter Meaning Vlan TaggingFRAME=TAGGEDUNTAGGED Tagged VLANs Summary of Vlan Tagging RulesLayer 2 Switching Process Generic Vlan Registration Protocol GvrpIngress Rules Learning Process Disable Switch LearningEnable Switch Ageingtimer Disable Switch Ageingtimer Enable Switch LearningSET Switch AGEINGTIMER=10..1000000 Show SwitchLayer 2 Filtering Example output from the Show Switch Filter commandFRAME=UNTAGGEDTAGGED Egress RulesQuality of Service SET Switch QOS=P1,P2,P3,P4,P5,P6,P7,P8Show Switch QOS Spanning Tree Port States Spanning Tree Protocol STPConfiguring STP SET STP=stpnameALL PRIORITY=0..65535 Example output from the Show STP command Parameters To display STP port information, use the command TCN Bpdu To show STP counters, use the commandIgmp Snooping Interfaces to Layer 3 ProtocolsPurge STP INTERFACE=VLAN3Enable IP Igmp Disable IP Igmp SET IP Igmp TIMEOUT=1..65535 QUERYINTERVAL=1..65535Show IP Igmp Group List TriggersEvent Page Show IP Interface Internet Protocol IPRouting Information Protocol RIP IP MulticastingNovell IPX Show IPX CircuitUplink AppleTalk Enable RsvpResource Reservation Protocol Rsvp ActiveRAW Show Rsvp Interface

C613-02013-00 specifications

The Allied Telesis C613-02013-00 is a versatile and powerful network switch designed to meet the demands of modern networking environments. This device is part of Allied Telesis's extensive range of networking solutions, catering to both enterprise and industrial applications. It is engineered for high performance, reliability, and ease of management, making it a suitable choice for organizations that require robust connectivity solutions.

One of the main features of the C613-02013-00 is its support for advanced Layer 2 switching capabilities. This provides businesses with the necessary tools to manage and direct network traffic efficiently. The switch includes support for VLAN (Virtual Local Area Network) technology, which allows for the segmentation of network traffic, enhancing both security and performance. With VLANs, organizations can isolate critical workloads and improve network management while ensuring that sensitive information is protected from unauthorized access.

Another key characteristic of the C613-02013-00 is its extensive support for Power over Ethernet (PoE). This feature enables the switch to deliver electrical power along with data over standard Ethernet cabling. This is particularly beneficial for powering devices such as IP cameras, wireless access points, and VoIP phones, reducing the need for additional power supply infrastructure. With PoE capabilities, the switch simplifies installation and enhances flexibility in deploying network devices.

The C613-02013-00 also boasts advanced network management features, including support for SNMP (Simple Network Management Protocol) for efficient monitoring and troubleshooting. This ensures that network administrators can maintain optimal performance and quickly address any issues that arise. Additionally, the switch supports network redundancy features like Rapid Spanning Tree Protocol (RSTP), which helps to prevent network loops and minimizes downtime.

In terms of physical characteristics, the C613-02013-00 is designed for durability and ease of deployment in various environments. Its compact form factor allows for effective space utilization in data centers and network closets. Moreover, it features a fanless design, making it suitable for deployment in noise-sensitive environments such as offices and classrooms.

In summary, the Allied Telesis C613-02013-00 is a robust network switch offering advanced features such as Layer 2 switching, PoE support, and comprehensive network management capabilities. Its design and performance make it an excellent choice for businesses seeking to enhance their network infrastructure with reliable and secure connectivity solutions.
Top Page Image Contents