Allied Telesis C613-02013-00 manual Static and dynamic VLANs, Creating VLANs Without Vlan Tags

Page 37

Layer 2 Switching

37

Static and dynamic VLANs

All VLANs created by the user on the command line are static VLANs. The default VLAN is also a static VLAN.

Dynamic VLANs are created by GVRP, a GARP application whose purpose is to propagate VLAN information between VLAN aware switches. These dynamic VLANs are entitled gvrpxxx, where xxx is the VLAN’s VLAN identifier. Dynamic VLANs will only be created if GVRP is enabled on the switch. GVRP is disabled by default.

All static VLANs except for the default VLAN can be destroyed by the user. Dynamic VLANs cannot be directly destroyed by the user, but may be destroyed according to the operations of GVRP by using the RESET GARP command or by disabling the GVRP instance.

The user can add, delete or modify ports belonging to any static VLAN. The user cannot add, delete or modify ports belonging to a dynamic VLAN. Dynamic VLANs created by GVRP only include tagged ports.

A port must belong to at least one static VLAN.

Creating VLANs Without VLAN Tags

VLANs that do not send any VLAN-tagged frames are logical groupings of ports. Any devices connected to the member ports share a common broadcast domain. The switch only forwards the traffic in a VLAN to the member ports.

Before any VLAN configuration has been entered, the switch has one default VLAN, which is initially configured to send untagged packets over all its member ports. More such VLANs can be created on the switch at any time. Each new VLAN is created with a VLAN name that is unique in the switch, and a VLAN Identifier (VID) that uniquely identifies the VLAN on the physical LAN. The default VLAN always has a VID of 1.

VLANs are created with the commands:

CREATE VLAN=vlanname VID=2..4094

The VLAN parameter specifies a unique name for the VLAN. This name can be more meaningful than the VID, to make administration easier. The VLAN name is only used within the switch; it is not transmitted to other VLAN-aware devices, or used in the Forwarding Process or kept in the Forwarding Database.

The VID parameter specifies a unique VLAN IDentifier for the VLAN. If VLAN-tagged ports are added to this VLAN, the specified VID is used in the VID field of the tag in outgoing frames. If VLAN-untagged ports are added to this VLAN, the specified VID only acts as an identifier for the VLAN in the Forwarding Database. The default port based VLAN has a VID of 1.

By default, all the ports on the switch belong to the default VLAN, except the mirror port if there is one configured. Any port can be added untagged to another VLAN, and is then automatically removed from the default VLAN. A port can only be untagged for one VLAN. A port can only be added to the default VLAN as an untagged port if it is not an untagged port for another VLAN.

Untagged ports are added to VLANs using the command:

ADD VLAN={vlanname1..4094} PORT={port-listALL}

Rapier Switch Software Release 2.2.1 C613-02013-00 Rev A

Page 36 Page 38
Image 37
Page 36 Page 38
Contents User Guide Page Contents Documentation Roadmap Chapter Why Read This User Guide?Technical support Where To Find More InformationSwitching Features What Can the Rapier Switch Do?Routing Features Advanced Feature Licence AT-RPFL3Upgrade Optional Features Command Line Interface Simple SwitchingEntering Commands Giving the Switch an IP AddressSET Password LoggingEnable GUI Enable AT-RPFL3Upgrade Feature LicenceEnabling the GUI Starting the GUI Graphical User InterfaceNavigating Monitoring File Subsystem User PrivilegesShow File Show System Online CLI HelpSaving Configuration Entered with the GUI Configuration ScriptsDram NoneEditor Saving Configuration Entered with the CLIInstall Information Show Install Delete InstallReleases and Patches into the Switch Load METHOD=HTTP DESTINATION=FLASH Example Install Software Upgrade for Rapier SwitchSnmp and MIBs Enable SnmpShow Load Show Snmp Enable Snmp AuthenticatetrapEnabling and Disabling Switch Ports Switch PortsISO8802-3 Csmacd EnabledOFF STPAcceptable Frames Types Autonegotiation of Port Speed and Duplex ModeSELECT=MACSRCMACDESTMACBOTHIPSRCIPDESTIPBOTH Port TrunkingShow VLAN=ALL Packet Storm Protection Port Mirroring Enable Switch Mirror Disable Switch Mirror ADD Switch L3FILTER MatchINTRUSIONACTION=NONEDISCARDTRAPDISABLE Port securityVirtual LANs Example output from the Show Switch Port Intrusion commandRapier Switch User Guide Creating VLANs Without Vlan Tags Static and dynamic VLANsMarketing Vlan Switch Training Vlan Trunk ports GarpParameter Meaning Vlan TaggingFRAME=TAGGEDUNTAGGED Tagged VLANs Summary of Vlan Tagging RulesGeneric Vlan Registration Protocol Gvrp Layer 2 Switching ProcessIngress Rules Learning Process Disable Switch LearningEnable Switch Ageingtimer Disable Switch Ageingtimer Enable Switch LearningSET Switch AGEINGTIMER=10..1000000 Show SwitchLayer 2 Filtering Example output from the Show Switch Filter commandFRAME=UNTAGGEDTAGGED Egress RulesSET Switch QOS=P1,P2,P3,P4,P5,P6,P7,P8 Quality of ServiceShow Switch QOS Spanning Tree Port States Spanning Tree Protocol STPConfiguring STP SET STP=stpnameALL PRIORITY=0..65535 Example output from the Show STP command Parameters To display STP port information, use the command TCN Bpdu To show STP counters, use the commandIgmp Snooping Interfaces to Layer 3 ProtocolsPurge STP INTERFACE=VLAN3SET IP Igmp TIMEOUT=1..65535 QUERYINTERVAL=1..65535 Enable IP Igmp Disable IP IgmpShow IP Igmp Group List TriggersEvent Page Show IP Interface Internet Protocol IPRouting Information Protocol RIP IP MulticastingShow IPX Circuit Novell IPXUplink AppleTalk Enable RsvpResource Reservation Protocol Rsvp ActiveRAW Show Rsvp Interface

C613-02013-00 specifications

The Allied Telesis C613-02013-00 is a versatile and powerful network switch designed to meet the demands of modern networking environments. This device is part of Allied Telesis's extensive range of networking solutions, catering to both enterprise and industrial applications. It is engineered for high performance, reliability, and ease of management, making it a suitable choice for organizations that require robust connectivity solutions.

One of the main features of the C613-02013-00 is its support for advanced Layer 2 switching capabilities. This provides businesses with the necessary tools to manage and direct network traffic efficiently. The switch includes support for VLAN (Virtual Local Area Network) technology, which allows for the segmentation of network traffic, enhancing both security and performance. With VLANs, organizations can isolate critical workloads and improve network management while ensuring that sensitive information is protected from unauthorized access.

Another key characteristic of the C613-02013-00 is its extensive support for Power over Ethernet (PoE). This feature enables the switch to deliver electrical power along with data over standard Ethernet cabling. This is particularly beneficial for powering devices such as IP cameras, wireless access points, and VoIP phones, reducing the need for additional power supply infrastructure. With PoE capabilities, the switch simplifies installation and enhances flexibility in deploying network devices.

The C613-02013-00 also boasts advanced network management features, including support for SNMP (Simple Network Management Protocol) for efficient monitoring and troubleshooting. This ensures that network administrators can maintain optimal performance and quickly address any issues that arise. Additionally, the switch supports network redundancy features like Rapid Spanning Tree Protocol (RSTP), which helps to prevent network loops and minimizes downtime.

In terms of physical characteristics, the C613-02013-00 is designed for durability and ease of deployment in various environments. Its compact form factor allows for effective space utilization in data centers and network closets. Moreover, it features a fanless design, making it suitable for deployment in noise-sensitive environments such as offices and classrooms.

In summary, the Allied Telesis C613-02013-00 is a robust network switch offering advanced features such as Layer 2 switching, PoE support, and comprehensive network management capabilities. Its design and performance make it an excellent choice for businesses seeking to enhance their network infrastructure with reliable and secure connectivity solutions.
Top Page Image Contents