Allied Telesis C613-02013-00 manual What Can the Rapier Switch Do?, Switching Features

Page 7

Introduction

7

What Can the Rapier Switch Do?

The Rapier switch software support for the Rapier Series switches and their expansion options provides wirespeed Layer 2 switching, including support for Virtual LANs, wirespeed Layer 3 IP switching, and Layer 3 multiprotocol routing.

Switching Features

The main Layer 2 features of the switch are:

■High performance, non-blocking, wire-speed Layer 2 switching (“Layer 2 Switching Process” on page 43).

■Packet Forwarding at wire speed (“The Forwarding Process” on page 45).

■Store and Forward switching mode.

■Autonegotiation of link speed and duplex mode for 10/100 Mbps speed on all 100BASE TX ports (“Autonegotiation of Port Speed and Duplex Mode” on page 29).

■Autonegotiation of duplex mode for 10/100 and gigabit Ethernet ports (“Autonegotiation of Port Speed and Duplex Mode” on page 29).

■Automatic, configurable MAC address learning and ageing, supporting up to 8191 MAC addresses per switch (“The Learning Process” on page 44).

■Switch Filtering (“Layer 2 Filtering” on page 46).

■Layer 3 Filtering (Switching chapter in Rapier Switch Software Reference).

■Broadcast Storm Protection (“Packet Storm Protection” on page 32).

■Virtual LANs defined by port membership (“Virtual LANs” on page 35).

■Spanning Tree Protocol (“Spanning Tree Protocol (STP)” on page 49).

■Priority tagging to support four QOS egress queues (“Quality of Service” on page 48).

■Port trunking to spread traffic over several links (“Port Trunking” on page 30).

■Port mirroring (“Port Mirroring” on page 33).

■IGMP (Internet Group Management Protocol) snooping (“IGMP Snooping” on page 56).

Rapier Switch Software Release 2.2.1 C613-02013-00 Rev A

Page 6 Page 8
Image 7
Page 6 Page 8
Contents User Guide Page Contents Documentation Roadmap Chapter Why Read This User Guide?Technical support Where To Find More InformationSwitching Features What Can the Rapier Switch Do?Routing Features Advanced Feature Licence AT-RPFL3Upgrade Optional Features Command Line Interface Simple SwitchingLogging Giving the Switch an IP AddressEntering Commands SET PasswordEnable GUI Enable AT-RPFL3Upgrade Feature LicenceEnabling the GUI Starting the GUI Graphical User InterfaceNavigating Monitoring File Subsystem User PrivilegesShow File Show System Online CLI HelpNone Configuration ScriptsSaving Configuration Entered with the GUI DramEditor Saving Configuration Entered with the CLIInstall Information Show Install Delete InstallReleases and Patches into the Switch Load METHOD=HTTP DESTINATION=FLASH Example Install Software Upgrade for Rapier SwitchSnmp and MIBs Enable SnmpShow Load Show Snmp Enable Snmp AuthenticatetrapEnabling and Disabling Switch Ports Switch PortsSTP EnabledISO8802-3 Csmacd OFFAcceptable Frames Types Autonegotiation of Port Speed and Duplex ModeSELECT=MACSRCMACDESTMACBOTHIPSRCIPDESTIPBOTH Port TrunkingShow VLAN=ALL Packet Storm Protection Port Mirroring Port security ADD Switch L3FILTER MatchEnable Switch Mirror Disable Switch Mirror INTRUSIONACTION=NONEDISCARDTRAPDISABLEVirtual LANs Example output from the Show Switch Port Intrusion commandRapier Switch User Guide Creating VLANs Without Vlan Tags Static and dynamic VLANsMarketing Vlan Switch Training Vlan Trunk ports GarpParameter Meaning Vlan TaggingFRAME=TAGGEDUNTAGGED Tagged VLANs Summary of Vlan Tagging RulesGeneric Vlan Registration Protocol Gvrp Layer 2 Switching ProcessIngress Rules Learning Process Disable Switch LearningShow Switch Enable Switch LearningEnable Switch Ageingtimer Disable Switch Ageingtimer SET Switch AGEINGTIMER=10..1000000Layer 2 Filtering Example output from the Show Switch Filter commandFRAME=UNTAGGEDTAGGED Egress RulesSET Switch QOS=P1,P2,P3,P4,P5,P6,P7,P8 Quality of ServiceShow Switch QOS Spanning Tree Port States Spanning Tree Protocol STPConfiguring STP SET STP=stpnameALL PRIORITY=0..65535 Example output from the Show STP command Parameters To display STP port information, use the command TCN Bpdu To show STP counters, use the commandINTERFACE=VLAN3 Interfaces to Layer 3 ProtocolsIgmp Snooping Purge STPSET IP Igmp TIMEOUT=1..65535 QUERYINTERVAL=1..65535 Enable IP Igmp Disable IP IgmpShow IP Igmp Group List TriggersEvent Page Show IP Interface Internet Protocol IPRouting Information Protocol RIP IP MulticastingShow IPX Circuit Novell IPXUplink Active Enable RsvpAppleTalk Resource Reservation Protocol RsvpRAW Show Rsvp Interface

C613-02013-00 specifications

The Allied Telesis C613-02013-00 is a versatile and powerful network switch designed to meet the demands of modern networking environments. This device is part of Allied Telesis's extensive range of networking solutions, catering to both enterprise and industrial applications. It is engineered for high performance, reliability, and ease of management, making it a suitable choice for organizations that require robust connectivity solutions.

One of the main features of the C613-02013-00 is its support for advanced Layer 2 switching capabilities. This provides businesses with the necessary tools to manage and direct network traffic efficiently. The switch includes support for VLAN (Virtual Local Area Network) technology, which allows for the segmentation of network traffic, enhancing both security and performance. With VLANs, organizations can isolate critical workloads and improve network management while ensuring that sensitive information is protected from unauthorized access.

Another key characteristic of the C613-02013-00 is its extensive support for Power over Ethernet (PoE). This feature enables the switch to deliver electrical power along with data over standard Ethernet cabling. This is particularly beneficial for powering devices such as IP cameras, wireless access points, and VoIP phones, reducing the need for additional power supply infrastructure. With PoE capabilities, the switch simplifies installation and enhances flexibility in deploying network devices.

The C613-02013-00 also boasts advanced network management features, including support for SNMP (Simple Network Management Protocol) for efficient monitoring and troubleshooting. This ensures that network administrators can maintain optimal performance and quickly address any issues that arise. Additionally, the switch supports network redundancy features like Rapid Spanning Tree Protocol (RSTP), which helps to prevent network loops and minimizes downtime.

In terms of physical characteristics, the C613-02013-00 is designed for durability and ease of deployment in various environments. Its compact form factor allows for effective space utilization in data centers and network closets. Moreover, it features a fanless design, making it suitable for deployment in noise-sensitive environments such as offices and classrooms.

In summary, the Allied Telesis C613-02013-00 is a robust network switch offering advanced features such as Layer 2 switching, PoE support, and comprehensive network management capabilities. Its design and performance make it an excellent choice for businesses seeking to enhance their network infrastructure with reliable and secure connectivity solutions.
Top Page Image Contents