Allied Telesis Patch 89262-08 manual Show ospf, Example output from the show ospf command

Page 31

Patch 89262-08 For AT-8900 Series Switches			show ospf	31

Parameter	Option/Range	Description

BGPLimit	1...300	The maximum number of BGP routes that can be imported into OSPF at a time. Once
		this limit is reached, importing stops until existing routes are removed. The default
		is 300.

*Caps denote command shortcuts

show ospf

Syntax SHow OSPF

Description This command displays information about the general configuration of OSPF routing (Figure 3 on page 31, Table 11 on page 31). New entries for the BGP route import feature are in bold.

Figure 3: Example output from the show ospf command
Router ID		123.234.143.231
OSPF module status		Enabled
Area border router status		Yes
AS border router status		Disabled
PTP stub network generation ..... Enabled
External LSA count		10234
External LSA sum of checksums ... 1002345623
New LSAs originated		10345
New LSAs received		34500
RIP		Off
BGP importing:
Enabled		Yes
Import filter		301
Routes imported/limit		214 / 300
Export static routes	............	Yes
Dynamic interface support		None
Number of active areas		10
Logging		Disabled
Debugging		Disabled
AS external default route:
Status		Disabled
Type		1
Metric		1
Table 11: Parameters for the BGP route import feature in the output of the show ospf
command.
Parameter	Meaning
BGP importing	Information about the importing of BGP routes into OSPF.
Enabled	Whether or not the importing of BGP routes into OSPF is
	enabled; one of “Yes” or “No”.
Import filter	The IP filter number used to filter routes before they are
	imported into OSPF, or “None” if no filters are used.
Routes imported/limit	The number of BGP routes imported into OSPF, and the
	maximum number of routes that can be imported at a time.

Patch 89262-08 for Software Release 2.6.2 C613-10402-00 REV H

Image 31

Contents Introduction Patch For AT-8900 Series SwitchesPCR 40591 Module Swmx Level FeaturesPCR Module IP6 Level PCR 40573 Module LOG LevelPCR 40603 Module SWI, Swmx Level PCR 40596 Module Swmx LevelPCR 40601 Module Swmx Level PCR Module IPG LevelPCR Module BGP Level Patch file details are listed in TablePCR 40460 Module Swmx Level PCR Module OSPF, IPG LevelPCR Module BGP, IGP Level PCR Module STP LevelPCR 40487 Module Core Level PCR Module Ospf LevelPCR 40496 Module Dhcp Level PCR Module Classifier Level PCR Module Vrrp LevelPCR 40516 Module Dhcp Level PCR 40520 Module Dvmrp LevelPCR Module QoS Level PCR 40543 Module Swmx LevelPCR 40544 Module Vlan Level PCR 40550 Module Swmx LevelPCR 40586 Module Swmx Level PCR 40592 Module Bootp LevelPCR 40571 Module Swmx Level PCR 40574 Module Swmx LevelPCR Module Rstp PCR 40525 Module SWI, SWX LevelPCR 40521 Module TACACS+ PCR Module PIM Level PCR Module NTP LevelPCR Module PIM4 Level PCR Module Ipsec LevelPCR Module SWMX,SWI Level PCR Module PPP LevelPCR Module IPv6 Level PCR 40405 Module Enco LevelPCR Module Firewall Level PCR 40413 Module QOS LevelPCR 40416 Module QOS Level PCR 40418 Module Swmx LevelPCR 40441 Module IPG, VRRPLevel PCR 40431 Module SWMXLevelPCR 40433 Module VLANLevel PCR 40440 Module CLASSIFIERLevelPCR 40371 Module Vlan Level PCR 40509 Module Swmx LevelPCR 40409 Module Swnp Level PCR 40363 Module Swnp Level PCR 40313 Module Swnp LevelPCR 40351 Module Vlan Level PCR 40352 Module Swnp LevelPCR 40396 Module Swmx Level PCR 40365 Module EZDRV, IPv6, Swnp LevelPCR 40367 Module Swmx Level PCR 40376 Module QOS LevelPCR Module IPG PCR 40382 Module Swmx LevelPCR Module IPG, SWI Level PCR Module IGMP, SWI LevelPCR Module IPG, IPV6 Level PCR 40249 Module SWI, SwmxPCR Module PIM6 PCR 40274 Module VLAN, Rmon LevelPCR 40341 Module SWMX, SWI PCR Module TM LevelPCR 40334 Module Vlan Level PCR 40338 Module Vlan LevelPCR 40245 Module Swnp PCR 40196 Module SWNP, EzdrvPCR 40213 Module QOS PCR 40224 Module EzdrvPCR Module IPV6 PCR Module OspfShow ip igmp Igmp Snooping All-Group EntryEnable ip igmp allgroup Enable ip igmp allgroupIgmp Snooping Disable ip igmp allgroupDescription where Add igmpsnooping routeraddressDelete igmpsnooping routeraddress Set igmpsnooping routermodeIcmp Redirect Messages for IPv6 Show igmpsnooping routeraddressImport Importing BGP routes into OspfParameter Option/Range Description Set ospfShow ospf Example output from the show ospf commandAvailability Add ip filter