Allied Telesis Patch 86261-04 manual Availability, PCR 03979 Module Core Level

Page 23

Patch 86261-04 For Rapier and AT-8800 Series Switches

SHOW IGMPSNOOPING ROUTERADDRESS

23

PCR: 03952

Module: SWI

Level: 3

MAC address are now deleted from the all the internal tables for ports where the learn limit has been exceeded.

PCR: 03953

Module: SW56

Level: 3

On AT-8800 series switches, strict QoS scheduling is now enforced for ports where egress rate limiting is applied. On Rapier i series switches, the same QoS setup is now applied to all of the appropriate ports when setting up egress rate limiting.

PCR: 03969

Module: IPG

Level: 2

When saving the IP filter configuration, non-default values for the source IP address mask were not always saved correctly. This issue has been resolved.

PCR: 03976

Module: SW56

Level: 3

On AT-8800 series switches, if a port was set to use 10 Mbps full duplex with the SET SWITCH PORT SPEED=10MBFULL command, there was a delay before the port was set. This delay has been minimised.

PCR: 03979 Module: CORE

Level: 3

On AT-8800 series switches, the temperature at which a temperature alarm is generated has been increased.

PCR: 31037

Module: SW56

Level: 2

Uplink modules on Rapier series switches sometimes did not enable a link correctly. This issue has been resolved.

Availability

Patches can be downloaded from the Software Updates area of the Allied Telesyn web site at www.alliedtelesyn.co.nz/support/updates/patches.html. A licence or password is not required to use a patch.

Patch 86261-04 for Software Release 2.6.1 C613-10386-00 REV D

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Patch For Rapier and AT-8800 Series Switches PCR Module Ospf Level PCR Module IPG LevelPCR Module BRI PCR Module IPV6 LevelPCR 31098 Module Dhcp Level PCR Module Http LevelPCR Module SWI Level PCR Module FFS LevelPCR Module IPG ADD Igmpsnooping RouteraddressPCR Module Rstp Level Delete Igmpsnooping RouteraddressPCR 31152 Module Dhcp Level PCR Module Firewall LevelPCR 31147 Module Dhcp Level PCR Module PIM, PIM6 LevelPCR 31161 Module LOG Level PCR Module STP LevelPCR Module Core Level PCR 31159 Module FW, Vlan LevelPCR Module SW56 Level PCR Module PORTAUTH, USER,STP LevelPCR Module User Level PCR Module SW56, SWI Level PCR Module PORTAUTH, User LevelPCR 31192 Module LOG Level PCR Module BGP, IP LevelPCR 31237 Module Core Level PCR 31215 Module Snmp LevelPCR Module PIM Level PCR Module TTY, User LevelPCR Module IGMP, SWI Level PCR Module TTY LevelPCR Module BGP, IPG Level PCR Module Ipsec LevelPCR Module PKI Level PCR 31015 Module STPLevel PCR 03996 Module FIREWALLLevelPCR 31001 Module DHCPLevel PCR 31013 Module SWILevelCurrent Temperature Normal Fan Status Error requiring attention. Failed means there was an PCR Module Ldap Level PCR Module NTP LevelPCR Module PPP Level PCR 31122 Module Rmon Level PCR Module File LevelPCR 31102 Module Dhcp Level PCR 31106 Module MLD LevelPCR Module BGP Level PCR Module OSPF, IPG LevelPCR Module Ikmp Level PCR 03885 Module Core Level PCR Module ETH Level PCR Module Switch LevelPCR Module DHCP, Telnet Level PCR 03895 Module Dhcp LevelPCR Module DHCP6 Level PCR Module SCC LevelPCR 03914 Module IPG, Vlan Level PCR Module CORE, SW56 LevelPCR Module Ipsec Level PCR 03979 Module Core Level AvailabilityShow Igmpsnooping Routeraddress

Patch 86261-04 specifications

Allied Telesis Patch 86261-04 is a highly reliable and efficient network switch designed for both enterprise and small to medium-sized business environments. Renowned for its robust performance and advanced features, this patch panel is an integral component for optimizing network connectivity.

One of the key characteristics of the 86261-04 is its superior build quality. This patch panel is constructed with high-grade materials that ensure durability even in challenging environments. The design focuses on effective heat dissipation, allowing for extended use without the risk of overheating. This feature is particularly vital for maintaining uptime in business-critical systems.

The 86261-04 boasts a versatile port configuration, typically including multiple 10/100/1000 Mbps Ethernet ports that support various networking requirements. Its ability to auto-sense the speed of incoming connections streamlines network management and scalability. Additionally, the switch supports Power over Ethernet (PoE), enabling it to deliver power alongside connectivity to devices such as IP cameras, wireless access points, and VoIP phones. This reduces the need for additional power sources and simplifies installation.

Advanced security features are another highlight of the Allied Telesis Patch 86261-04. It incorporates VLAN capabilities, allowing network administrators to create isolated segments within the network for enhanced security. This segregation helps prevent unauthorized access and minimizes the risk of data breaches. Alongside security protocols, the switch supports Quality of Service (QoS) which prioritizes traffic according to the needs of the business, ensuring critical applications function smoothly even during peak usage times.

In terms of technology, the 86261-04 is designed with ease of configuration and management in mind. It is compatible with both command-line and web-based interfaces, providing flexibility for network administrators with varying levels of expertise. Comprehensive monitoring and reporting tools guide users in troubleshooting and optimizing network performance.

Moreover, Allied Telesis is known for its commitment to sustainability, and the 86261-04 is no exception. This model is energy-efficient, contributing to lower operating costs while maintaining high performance standards.

In summary, the Allied Telesis Patch 86261-04 stands out with its robust design, versatile port configuration, extensive network security features, and commitment to energy efficiency, making it an excellent choice for organizations looking to enhance their networking capabilities.
Top Page Image Contents