Allied Telesis Patch 86261-04 manual PCR Module PORTAUTH, USER,STP Level, PCR Module User Level

Page 8

8

SHOW IGMPSNOOPING ROUTERADDRESS

Patch Release Note

PCR: 31171

Module: PORTAUTH, USER,STP

Level: 2

This PCR enhances the robustness of the 802.1x port authentication protocol.

PCR: 31174

Module: IPG

Level: 2

If a device had IPSec and firewall enabled, it could not handle long ICMP packets even when enhanced fragment handling was enabled on the firewall. If a long packet is passed to the firewall for processing, the firewall chains the fragmented packets. The firewall can process chained packets, but IPSec could not process these packets, and dropped them. This was only an issue for packets between 1723 and 1799 bytes long. This issue has been resolved. The way IP processes fragmented packets has been changed so that IPsec no longer drops chained packets.

PCR: 31179

Module: SWI

Level: 3

Addresses learned with static port security were not added to the configuration when the CREATE CONFIG command was executed. This issue has been resolved.

PCR: 31180

Module: USER

Level: 2

The following commands did not require security officer privilege when the device was in security mode, but this privilege should have been required:

•ADD USER

•SET USER

•DELETE USER

•PURGE USER

•ENABLE USER

•DISABLE USER

•RESET USER

This issue has been resolved. Security officer privilege is now required for these commands when security mode is enabled with the ENABLE SYSTEM SECURITY_MODE command.

PCR: 31184

Module: SW56

Level: 2

Some issues occurred on 48 port Rapier series switches when MAC addresses were learned and then relearned on a different port. These issues have been resolved.

PCR: 31185

Module: SWI

Level: 2

Tagged ports did not tag packets received from the bridge before

 

transmitting them. This issue has been resolved.

 

PCR: 31190

Module: SWI, SW56

Level: 2

When static port security was enabled with the RELEARN parameter in the SET SWITCH PORT command, and a switch port was reset or unplugged, the MAC entries were removed (unlearned) from the forwarding database table. The MAC entries should only be removed when dynamic port security is in use. This issue has been resolved.

Patch 86261-04 for Software Release 2.6.1 C613-10386-00 REV D

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Patch For Rapier and AT-8800 Series Switches PCR Module IPG Level PCR Module BRIPCR Module IPV6 Level PCR Module Ospf LevelPCR Module Http Level PCR Module SWI LevelPCR Module FFS Level PCR 31098 Module Dhcp LevelADD Igmpsnooping Routeraddress PCR Module IPGDelete Igmpsnooping Routeraddress PCR Module Rstp LevelPCR Module Firewall Level PCR 31147 Module Dhcp LevelPCR Module PIM, PIM6 Level PCR 31152 Module Dhcp LevelPCR Module STP Level PCR Module Core LevelPCR 31159 Module FW, Vlan Level PCR 31161 Module LOG LevelPCR Module SW56 Level PCR Module PORTAUTH, USER,STP LevelPCR Module User Level PCR Module PORTAUTH, User Level PCR 31192 Module LOG LevelPCR Module BGP, IP Level PCR Module SW56, SWI LevelPCR 31215 Module Snmp Level PCR 31237 Module Core LevelPCR Module TTY, User Level PCR Module IGMP, SWI LevelPCR Module TTY Level PCR Module PIM LevelPCR Module BGP, IPG Level PCR Module Ipsec LevelPCR Module PKI Level PCR 03996 Module FIREWALLLevel PCR 31001 Module DHCPLevelPCR 31013 Module SWILevel PCR 31015 Module STPLevelCurrent Temperature Normal Fan Status Error requiring attention. Failed means there was an PCR Module Ldap Level PCR Module NTP LevelPCR Module PPP Level PCR Module File Level PCR 31102 Module Dhcp LevelPCR 31106 Module MLD Level PCR 31122 Module Rmon LevelPCR Module BGP Level PCR Module OSPF, IPG LevelPCR Module Ikmp Level PCR 03885 Module Core Level PCR Module Switch Level PCR Module DHCP, Telnet LevelPCR 03895 Module Dhcp Level PCR Module ETH LevelPCR Module SCC Level PCR 03914 Module IPG, Vlan LevelPCR Module CORE, SW56 Level PCR Module DHCP6 LevelPCR Module Ipsec Level Availability PCR 03979 Module Core LevelShow Igmpsnooping Routeraddress

Patch 86261-04 specifications

Allied Telesis Patch 86261-04 is a highly reliable and efficient network switch designed for both enterprise and small to medium-sized business environments. Renowned for its robust performance and advanced features, this patch panel is an integral component for optimizing network connectivity.

One of the key characteristics of the 86261-04 is its superior build quality. This patch panel is constructed with high-grade materials that ensure durability even in challenging environments. The design focuses on effective heat dissipation, allowing for extended use without the risk of overheating. This feature is particularly vital for maintaining uptime in business-critical systems.

The 86261-04 boasts a versatile port configuration, typically including multiple 10/100/1000 Mbps Ethernet ports that support various networking requirements. Its ability to auto-sense the speed of incoming connections streamlines network management and scalability. Additionally, the switch supports Power over Ethernet (PoE), enabling it to deliver power alongside connectivity to devices such as IP cameras, wireless access points, and VoIP phones. This reduces the need for additional power sources and simplifies installation.

Advanced security features are another highlight of the Allied Telesis Patch 86261-04. It incorporates VLAN capabilities, allowing network administrators to create isolated segments within the network for enhanced security. This segregation helps prevent unauthorized access and minimizes the risk of data breaches. Alongside security protocols, the switch supports Quality of Service (QoS) which prioritizes traffic according to the needs of the business, ensuring critical applications function smoothly even during peak usage times.

In terms of technology, the 86261-04 is designed with ease of configuration and management in mind. It is compatible with both command-line and web-based interfaces, providing flexibility for network administrators with varying levels of expertise. Comprehensive monitoring and reporting tools guide users in troubleshooting and optimizing network performance.

Moreover, Allied Telesis is known for its commitment to sustainability, and the 86261-04 is no exception. This model is energy-efficient, contributing to lower operating costs while maintaining high performance standards.

In summary, the Allied Telesis Patch 86261-04 stands out with its robust design, versatile port configuration, extensive network security features, and commitment to energy efficiency, making it an excellent choice for organizations looking to enhance their networking capabilities.
Top Page Image Contents