Allied Telesis Patch 86261-04 manual PCR Module Ipsec Level

Page 22

22

SHOW IGMPSNOOPING ROUTERADDRESS

Patch Release Note

PCR: 03930

Module: FIREWALL

Level: 2

A fatal error sometimes occurred when certain types of traffic travelled over a WAN interface connected to the Internet. This issue has been resolved.

PCR: 03931

Module: IPSEC

Level: 3

The IPSec configuration was not created correctly when the RADDRESS and LNAME parameters in the CREATE IPSEC POLICY command were used together. This issue has been resolved.

PCR: 03933

Module: SW56, SWI

Level: 2

When a Rapier rebooted while a GBIC port was receiving broadcast packets, some copper GBICs did not send packets after the switch booted up. Also, when a copper GBIC received pause frames on a Rapier, it did not stop sending packets. These issues have been resolved.

PCR: 03934

Module: IPSEC

Level: 2

The CREATE IPSEC POLICY command failed if the interface specified with the INTERFACE parameter did not have a global IPv6 interface defined. This PCR implements a workaround by using the interface’s link-local IPv6 address if no other IPv6 address can be found.

PCR: 03936

Module: IKMP

Level: 3

When ISAKMP was used with IPv6, an incorrect IP address was displayed in the output of the SHOW ISAKMP EXCHANGE command. This issue has been resolved.

PCR: 03938

Module: IKMP

Level: 3

DHEXPONENTLENGTH parameter in the CREATE ISAKMP POLICY command was not accepted when creating ISAKMP policies that used IPv6. This issue has been resolved.

PCR: 03939

Module: IPV6

Level: 2

When a NeighbourAdvert message containing an anycast target address was received, the device incorrectly performed Duplicate Address Detection. This issue has been resolved.

PCR: 03942

Module: SW56

Level: 2

IP multicasting was not operating correctly across all ports on an AT-8848 switch. This issue has been resolved.

PCR: 03946

Module: IPSEC

Level: 3

When IPSec was used with IPv6, an incorrect IP address was displayed in the output of the SHOW IPSEC SA command. This issue has been resolved.

PCR: 03949

Module: IPSEC

Level: 3

If a local IP address and remote IP address were not specified in the CREATE IPSEC POLICY command for IPv6 IPSec, the SET IPSEC POLICY configuration was shown unnecessarily in the output of the SHOW CONFIG DYNAMIC=IPSEC command. This issue has been resolved.

Patch 86261-04 for Software Release 2.6.1 C613-10386-00 REV D

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Patch For Rapier and AT-8800 Series Switches PCR Module IPV6 Level PCR Module IPG LevelPCR Module BRI PCR Module Ospf LevelPCR Module FFS Level PCR Module Http LevelPCR Module SWI Level PCR 31098 Module Dhcp LevelADD Igmpsnooping Routeraddress PCR Module IPGDelete Igmpsnooping Routeraddress PCR Module Rstp LevelPCR Module PIM, PIM6 Level PCR Module Firewall LevelPCR 31147 Module Dhcp Level PCR 31152 Module Dhcp LevelPCR 31159 Module FW, Vlan Level PCR Module STP LevelPCR Module Core Level PCR 31161 Module LOG LevelPCR Module User Level PCR Module PORTAUTH, USER,STP LevelPCR Module SW56 Level PCR Module BGP, IP Level PCR Module PORTAUTH, User LevelPCR 31192 Module LOG Level PCR Module SW56, SWI LevelPCR 31215 Module Snmp Level PCR 31237 Module Core LevelPCR Module TTY Level PCR Module TTY, User LevelPCR Module IGMP, SWI Level PCR Module PIM LevelPCR Module PKI Level PCR Module Ipsec LevelPCR Module BGP, IPG Level PCR 31013 Module SWILevel PCR 03996 Module FIREWALLLevelPCR 31001 Module DHCPLevel PCR 31015 Module STPLevelCurrent Temperature Normal Fan Status Error requiring attention. Failed means there was an PCR Module PPP Level PCR Module NTP LevelPCR Module Ldap Level PCR 31106 Module MLD Level PCR Module File LevelPCR 31102 Module Dhcp Level PCR 31122 Module Rmon LevelPCR Module Ikmp Level PCR Module OSPF, IPG LevelPCR Module BGP Level PCR 03885 Module Core Level PCR 03895 Module Dhcp Level PCR Module Switch LevelPCR Module DHCP, Telnet Level PCR Module ETH LevelPCR Module CORE, SW56 Level PCR Module SCC LevelPCR 03914 Module IPG, Vlan Level PCR Module DHCP6 LevelPCR Module Ipsec Level Availability PCR 03979 Module Core LevelShow Igmpsnooping Routeraddress

Patch 86261-04 specifications

Allied Telesis Patch 86261-04 is a highly reliable and efficient network switch designed for both enterprise and small to medium-sized business environments. Renowned for its robust performance and advanced features, this patch panel is an integral component for optimizing network connectivity.

One of the key characteristics of the 86261-04 is its superior build quality. This patch panel is constructed with high-grade materials that ensure durability even in challenging environments. The design focuses on effective heat dissipation, allowing for extended use without the risk of overheating. This feature is particularly vital for maintaining uptime in business-critical systems.

The 86261-04 boasts a versatile port configuration, typically including multiple 10/100/1000 Mbps Ethernet ports that support various networking requirements. Its ability to auto-sense the speed of incoming connections streamlines network management and scalability. Additionally, the switch supports Power over Ethernet (PoE), enabling it to deliver power alongside connectivity to devices such as IP cameras, wireless access points, and VoIP phones. This reduces the need for additional power sources and simplifies installation.

Advanced security features are another highlight of the Allied Telesis Patch 86261-04. It incorporates VLAN capabilities, allowing network administrators to create isolated segments within the network for enhanced security. This segregation helps prevent unauthorized access and minimizes the risk of data breaches. Alongside security protocols, the switch supports Quality of Service (QoS) which prioritizes traffic according to the needs of the business, ensuring critical applications function smoothly even during peak usage times.

In terms of technology, the 86261-04 is designed with ease of configuration and management in mind. It is compatible with both command-line and web-based interfaces, providing flexibility for network administrators with varying levels of expertise. Comprehensive monitoring and reporting tools guide users in troubleshooting and optimizing network performance.

Moreover, Allied Telesis is known for its commitment to sustainability, and the 86261-04 is no exception. This model is energy-efficient, contributing to lower operating costs while maintaining high performance standards.

In summary, the Allied Telesis Patch 86261-04 stands out with its robust design, versatile port configuration, extensive network security features, and commitment to energy efficiency, making it an excellent choice for organizations looking to enhance their networking capabilities.
Top Page Image Contents