Allied Telesis Patch 86261-04 manual PCR Module DHCP, Telnet Level, PCR 03895 Module Dhcp Level

Page 20

20

SHOW IGMPSNOOPING ROUTERADDRESS

Patch Release Note

PCR: 03886

Module: SW56

Level: 3

AT-8800 series switches received frames when the physical link was not established. This issue has been resolved.

PCR: 03888

Module: DHCP, TELNET

Level: 2

When the device was configured as a DHCP server, a fatal error sometimes occurred when a telnet session to the device was closed while DHCP was reclaiming IP addresses. Also, a telnet error message displayed an incorrect value when a telnet command line parameter was repeated (for example, SHOW TELNET TELNET). These issues have been resolved.

PCR: 03895 Module: DHCP

Level: 2

If the DHCP server had a policy name greater than 5 characters long, and a very long MERITDUMP or ROOTPATH value, the device could not correctly create the configuration. This issue has been resolved.

PCR: 03896

Module: TTY

Level: 3

A fatal error occurred when a long string of text was pasted over an existing long string of text at the CLI. This issue has been resolved.

PCR: 03898

Module: ETH

Level: 3

An ETH interface was sometimes shown as Up in the output of the SHOW INTERFACE command when it was actually Down. This issue has been resolved.

PCR: 03902

Module: FIREWALL

Level: 3

Under some circumstances traffic did not have NAT applied if a standard subnet NAT rule was added to a public interface. Such rules did not correctly match incoming traffic when the REMOTEIP parameter in the ADD FIREWALL POLICY RULE command was not specified, and the destination IP address was not the interface’s actual IP address. If this situation occurred, traffic was redirected back out the public interface. This issue has been resolved.

PCR: 03903

Module: SWI

Level: 2

Filtering was not working correctly on AT-8848 switches between port groups 1-24, 25-48, and the two GBIC ports. This issue has been resolved.

PCR: 03904

Module: SWI

Level: 3

Port mirroring was not working correctly on AT-8848 switches where the source, destination and mirror ports were spread between two or more of the port groups 1-24, 25-48, and the two GBIC ports. This issue has been resolved.

PCR: 03906

Module: SWITCH

Level: 2

Software emulation of layer 3 hardware filtering was not operating correctly. Packets that the switch had no routing information for were filtered incorrectly. The first packet of a flow that should have been dropped was not dropped, and a flow that should have been allowed was being dropped. This issue has been resolved.

Patch 86261-04 for Software Release 2.6.1 C613-10386-00 REV D

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Patch For Rapier and AT-8800 Series Switches PCR Module IPG Level PCR Module BRIPCR Module IPV6 Level PCR Module Ospf LevelPCR Module Http Level PCR Module SWI LevelPCR Module FFS Level PCR 31098 Module Dhcp LevelADD Igmpsnooping Routeraddress PCR Module IPGDelete Igmpsnooping Routeraddress PCR Module Rstp LevelPCR Module Firewall Level PCR 31147 Module Dhcp LevelPCR Module PIM, PIM6 Level PCR 31152 Module Dhcp LevelPCR Module STP Level PCR Module Core LevelPCR 31159 Module FW, Vlan Level PCR 31161 Module LOG LevelPCR Module SW56 Level PCR Module PORTAUTH, USER,STP LevelPCR Module User Level PCR Module PORTAUTH, User Level PCR 31192 Module LOG LevelPCR Module BGP, IP Level PCR Module SW56, SWI LevelPCR 31215 Module Snmp Level PCR 31237 Module Core LevelPCR Module TTY, User Level PCR Module IGMP, SWI LevelPCR Module TTY Level PCR Module PIM LevelPCR Module BGP, IPG Level PCR Module Ipsec LevelPCR Module PKI Level PCR 03996 Module FIREWALLLevel PCR 31001 Module DHCPLevelPCR 31013 Module SWILevel PCR 31015 Module STPLevelCurrent Temperature Normal Fan Status Error requiring attention. Failed means there was an PCR Module Ldap Level PCR Module NTP LevelPCR Module PPP Level PCR Module File Level PCR 31102 Module Dhcp LevelPCR 31106 Module MLD Level PCR 31122 Module Rmon LevelPCR Module BGP Level PCR Module OSPF, IPG LevelPCR Module Ikmp Level PCR 03885 Module Core Level PCR Module Switch Level PCR Module DHCP, Telnet LevelPCR 03895 Module Dhcp Level PCR Module ETH LevelPCR Module SCC Level PCR 03914 Module IPG, Vlan LevelPCR Module CORE, SW56 Level PCR Module DHCP6 LevelPCR Module Ipsec Level Availability PCR 03979 Module Core LevelShow Igmpsnooping Routeraddress

Patch 86261-04 specifications

Allied Telesis Patch 86261-04 is a highly reliable and efficient network switch designed for both enterprise and small to medium-sized business environments. Renowned for its robust performance and advanced features, this patch panel is an integral component for optimizing network connectivity.

One of the key characteristics of the 86261-04 is its superior build quality. This patch panel is constructed with high-grade materials that ensure durability even in challenging environments. The design focuses on effective heat dissipation, allowing for extended use without the risk of overheating. This feature is particularly vital for maintaining uptime in business-critical systems.

The 86261-04 boasts a versatile port configuration, typically including multiple 10/100/1000 Mbps Ethernet ports that support various networking requirements. Its ability to auto-sense the speed of incoming connections streamlines network management and scalability. Additionally, the switch supports Power over Ethernet (PoE), enabling it to deliver power alongside connectivity to devices such as IP cameras, wireless access points, and VoIP phones. This reduces the need for additional power sources and simplifies installation.

Advanced security features are another highlight of the Allied Telesis Patch 86261-04. It incorporates VLAN capabilities, allowing network administrators to create isolated segments within the network for enhanced security. This segregation helps prevent unauthorized access and minimizes the risk of data breaches. Alongside security protocols, the switch supports Quality of Service (QoS) which prioritizes traffic according to the needs of the business, ensuring critical applications function smoothly even during peak usage times.

In terms of technology, the 86261-04 is designed with ease of configuration and management in mind. It is compatible with both command-line and web-based interfaces, providing flexibility for network administrators with varying levels of expertise. Comprehensive monitoring and reporting tools guide users in troubleshooting and optimizing network performance.

Moreover, Allied Telesis is known for its commitment to sustainability, and the 86261-04 is no exception. This model is energy-efficient, contributing to lower operating costs while maintaining high performance standards.

In summary, the Allied Telesis Patch 86261-04 stands out with its robust design, versatile port configuration, extensive network security features, and commitment to energy efficiency, making it an excellent choice for organizations looking to enhance their networking capabilities.
Top Page Image Contents