Allied Telesis GS900/5E manual Maximum Distance

Page 16

Chapter 1: Product Description

Maximum Distance

Each twisted pair port has a maximum operating distance of 100 m (328 feet).

Type of Cabling

For 10 Mbps operation, Category 3 or better 100 ohm shielded or unshielded twisted pair cabling is required. For 100 or 1000 Mbps operation, Category 5 and Enhanced Category 5 (5E) 100 ohm shielded or unshielded twisted pair cabling is required.

Auto MDI/MDI-X

All of the twisted pair ports on the switch are auto-MDI and IEEE 802.3ab- compatible. When a port's speed and duplex mode are set through Auto- Negotiation, the port uses the auto-MDI feature to automatically configure itself as MDI or MDI-X when connected to an end-node. Consequently, you can use either a straight-through or crossover twisted pair cable when connecting any network device to a port.

LEDs The system and port LEDs on the front panel of the AT-GS900/16 and AT-GS900/24 switches display the switch and its port status information. See Figure 3. Each port has two LEDs.

AT-GS900/16

607

AT-GS900/24

608

Figure 3. Port LEDs

16

Image 16
Contents Installation Guide Page Electrical Safety and Emissions Standards Translated Safety Statements Contents Contents Preface Safety Symbols Used in this Document Symbol Meaning DescriptionWhere to Find Web-based Guides Warranty Contacting Allied TelesisManagement Software Updates Product Description ChapterFeatures StandardsComponents Front PanelsHardware Feature Description Twisted Pair PortsMaximum Distance AC Power Connector Ethernet Switching Basics MAC Address TableDuplex Mode Store Forward Power Workgroup Topology Network TopologiesCollapsed Backbone Installation Reviewing Safety Precautions Selecting a Site for the Switch Planning the Installation Speed Type of Cable MaximumUnpacking the Switch Installing the Switch on a Table or Desktop Installation Installing the Switch on a Wall Attaching the brackets to the sides of the switch1303 Page Installing the Switch in a Rack Attaching Rackmounting Brackets606 Installation Cabling the Switch Powering On the Switch Troubleshooting Technical Specifications Physical SpecificationsEnvironmental Specifications Power SpecificationsRJ-45 Twisted Pair Port Connectors Safety and Electromagnetic Emissions CertificationsCompliance Standards Pin Signal