PrintServer for USB with 4-Port Switch
The Front Panel
The PrintServer's LEDs, where information about network activity is displayed, are located on the front panel.
| Figure |
Status | Green. The Status LED will remain continuously lit when a printer is correctly connected to the |
| PrintServer. The LED will flicker when print jobs are being transmitted to the printer over the |
| network. |
USB | Green/Orange. The USB LED lights up green when there is a printer connected. The USB LED |
| lights up orange when there is an error. |
1, 2, 3, 4 | Green. These numbered LEDs, corresponding with the numbered ports on the PrintServer’s |
| back panel, serve two purposes. If the LED is continuously illuminated, the PrintServer is |
| successfully connected to a device through the LAN port. If the LED is flickering, the |
| PrintServer is actively sending or receiving data to the wired network. |
Figure 2-3: The USB PrintServer’s Side Panel
The Side Panel
Power | The Power port is where you will connect the power adapter. |
|
Chapter 2: Getting to Know the USB PrintServer | 5 | |
The Front Panel