Linksys PSUS4 manual Apple Talk

Page 41

PrintServer for USB with 4-Port Switch

Apple Talk (Figure 8-18)

AppleTalk is a network communications protocol that allows computers to talk to each other using Ethernet. Typically only Macintoshes use AppleTalk, although other platforms can be made to use it with extra software. Enter the Zone Name in the field. Select the port number from the drop-down menu. The Printer Type can be obtained from the manufacturer of the printer. Enter the type of printer in the field. For each printer connected to the PrintServer, you will choose the Communications Protocol that allows the devices on the network to communicate. Select the type of Communication Protocol you will use, ASCII or Binary for each printer, according to the recommendation of the printer’s manufacturer.

Click the Get Defaults button if you want to return the settings to the default settings.

When finished making your changes on this tab, click the OK button to save these changes, or click the Cancel button to undo your changes. For more information, click the Help button.

NetBEUI (Figure 8-19)

Enter the name of the domain that you want the PrintServer associated with in the Domain Name field. If you are unsure of the Domain Name, you can find it out by looking on any computer already on the network. In Windows 98, right click Network Neighborhood and select Properties. Under the Identification tab, there will be listed that computer’s name, and the Domain to which it is connected. For Windows Me and 2000, right click My Network Places. In Windows Me, choose Properties from the menu that appears. In Windows 2000 or XP, choose Properties from the menu that appears. Then, right click Local Area Connection and choose Properties. The Domain name will appear. If you want the PrintServer to be connected to that same Domain, enter that Domain name here. If no Domain name exists there, you will use the Workgroup name from that window. You can specify the Response Time that you prefer for the PrintServer. This is the amount of time (measured in seconds) that the PrintServer will wait for a response from the network before “timing out.” You also have the option to Abort Print Job if Error. Selecting Yes here will terminate the printing if there is an error of any kind. If you select No, print jobs that have errors will be sent to the printer, but might not print properly.

Click the Get Defaults button if you want to return the settings to the default settings.

When finished making your changes on this tab, click the OK button to save these changes, or click the Cancel button to undo your changes. For more information, click the Help button.

Chapter 8: Bi-Admin Management

Figure 8-18: Apple Talk

Figure 8-19: NetBEUI

34

The Bi-Admin Management Utility

Image 41
Contents PrintServer for USB Copyright and Trademarks How to Use this User GuideTable of Contents Common Problems and Solutions USB PrintServer’s Back Panel List of FiguresDriver’s Welcome Connected Protocol What’s in this Guide? IntroductionWelcome Introduction What’s in this Guide? PrintServer for USB with 4-Port Switch Back Panel USB Connector-Type aGetting to Know the USB PrintServer Side Panel Front PanelOverview Connecting the USB PrintServer to your NetworkInstallation Installing the PrintServer using the Setup WizardPassword IP Settings Confirmation Windows Driver Installation Driver’s Welcome Select Program Folder TCP/IP 10 Configure Printer Port Setup Tab Configuring the PrintServerProtocol Tab Apple Talk Protocol Tab TCP/IPNetBEUI Protocol Tab NetBEUIInternet Printing Printer Tab Internet PrintingLogical Port Printer Tab Logical PortStatus Tab Printer Status Tab DeviceExit Exit TabInstalling using setup.exe Windows IPP Client SetupIPP Client Configuration for Windows 98, Me, 2000, and XP Internet Printing ProtocolAddPort Changing the IPP Port SettingsUsing IPP Printers IPP Client Setup for Windows 2000 and XPInternet Printing Protocol Windows IPP Client Setup Bi-Admin Installation Bi-Admin ManagementBi-Admin Installation Connected Protocol Starting the Bi-Admin Management UtilityMenu Options Bi-Admin Management Utility12 Printer Status 14 Verify Password TCP/IP 18 Apple Talk 20 Internet Printing 22 Attached Remote Common Problems and Solutions Appendix a TroubleshootingNeed to upgrade the firmware Appendix B About Bi-Directional Printing Appendix C Upgrading Firmware Figure C-1 Upgrade FirmwareNetwork Neighborhood/My Network Places Appendix D Windows HelpShared Resources Appendix E Glossary PrintServer for USB with 4-Port Switch PrintServer for USB with 4-Port Switch PrintServer for USB with 4-Port Switch PrintServer for USB with 4-Port Switch PrintServer for USB with 4-Port Switch Appendix F Specifications Limited Warranty Appendix G Warranty InformationFCC Statement Appendix H Regulatory InformationAppendix I Contact Information