Linksys PSUS4 manual Need to upgrade the firmware

Ad

Page 45

PrintServer for USB with 4-Port Switch

6.The Configuration button on the Printer Status screen in Bi-Admin is grayed out, even though my printer is bi-directional.

The button is unavailable until the printer has finished its print jobs and sits idle.

7.To start over, I need to set the PrintServer to factory default.

Unplug the power to the PrintServer. Press in the Reset button and plug in the power and continue to hold for 10 seconds. This will return the password and other settings on the PrintServer to the factory default settings. In other words, the PrintServer will revert to its original factory configuration.

8.I need to upgrade the firmware.

In order to upgrade the firmware with the latest features, you need to go to the Linksys website and download the latest firmware at www.linksys.com.

•Follow these steps:

1.Go to the Linksys website at http://www.linksys.com and download the latest firmware.

2.To upgrade the firmware, follow the steps in “Appendix C: Upgrading Firmware.”

Appendix A:

38

Common Problems and Solutions

Image 45

Linksys PSUS4 manual Need to upgrade the firmware

Contents PrintServer for USB Copyright and Trademarks How to Use this User GuideTable of Contents Common Problems and Solutions USB PrintServer’s Back Panel List of FiguresDriver’s Welcome Connected Protocol Introduction WelcomeWhat’s in this Guide? Introduction What’s in this Guide? PrintServer for USB with 4-Port Switch USB Connector-Type a Getting to Know the USB PrintServerBack Panel Side Panel Front PanelOverview Connecting the USB PrintServer to your NetworkInstallation Installing the PrintServer using the Setup WizardPassword IP Settings Confirmation Windows Driver Installation Driver’s Welcome Select Program Folder TCP/IP 10 Configure Printer Port Setup Tab Configuring the PrintServerProtocol Tab Apple Talk Protocol Tab TCP/IPNetBEUI Protocol Tab NetBEUIInternet Printing Printer Tab Internet PrintingLogical Port Printer Tab Logical PortStatus Tab Printer Status Tab DeviceExit Exit TabInstalling using setup.exe Windows IPP Client SetupIPP Client Configuration for Windows 98, Me, 2000, and XP Internet Printing ProtocolAddPort Changing the IPP Port SettingsUsing IPP Printers IPP Client Setup for Windows 2000 and XPInternet Printing Protocol Windows IPP Client Setup Bi-Admin Installation Bi-Admin ManagementBi-Admin Installation Connected Protocol Starting the Bi-Admin Management UtilityMenu Options Bi-Admin Management Utility12 Printer Status 14 Verify Password TCP/IP 18 Apple Talk 20 Internet Printing 22 Attached Remote Common Problems and Solutions Appendix a TroubleshootingNeed to upgrade the firmware Appendix B About Bi-Directional Printing Appendix C Upgrading Firmware Figure C-1 Upgrade FirmwareAppendix D Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Appendix E Glossary PrintServer for USB with 4-Port Switch PrintServer for USB with 4-Port Switch PrintServer for USB with 4-Port Switch PrintServer for USB with 4-Port Switch PrintServer for USB with 4-Port Switch Appendix F Specifications Limited Warranty Appendix G Warranty InformationFCC Statement Appendix H Regulatory InformationAppendix I Contact Information