Linksys PSUS4 manual Printer Tab Logical Port

Page 27

PrintServer for USB with 4-Port Switch

The Printer Tab - Logical Port

The Logical Printers tab contains the logical printer settings of the PrintServer. Select from the following fields for each Logical Printer. (See Figure 6-6.)

Select Printer. Select the number (1-3) from the drop-down menu of Logical Printer Port No: you wish to configure. Click the Get Data button to update the display with the current data for the selected logical printer.

Details

•Pre-string (Hex). Enter the printer control string (in hexadecimal characters) to be sent to the printer before each print job. This string cannot exceed 30 characters.

•Post String (Hex). Enter the printer control string (in hexadecimal characters) to be sent to the printer after each print job. This string cannot exceed 30 characters.

•Convert LF to CR+LF. If checked, LF (line feed) characters are changed to CR+LF (carriage return + line feed).

Change these settings as described here and click the Save button to apply your changes or click Cancel to cancel your changes.

Chapter 6: Configuring the PrintServer

Figure 6-6: Logical Port

20

The Printer Tab - Internet Printing

Image 27

Contents PrintServer for USB Copyright and Trademarks How to Use this User GuideTable of Contents Common Problems and Solutions USB PrintServer’s Back Panel List of FiguresDriver’s Welcome Connected Protocol Introduction WelcomeWhat’s in this Guide? Introduction What’s in this Guide? PrintServer for USB with 4-Port Switch USB Connector-Type a Getting to Know the USB PrintServerBack Panel Side Panel Front PanelOverview Connecting the USB PrintServer to your NetworkInstallation Installing the PrintServer using the Setup WizardPassword IP Settings Confirmation Windows Driver Installation Driver’s Welcome Select Program Folder TCP/IP 10 Configure Printer Port Setup Tab Configuring the PrintServerProtocol Tab Apple Talk Protocol Tab TCP/IPNetBEUI Protocol Tab NetBEUIInternet Printing Printer Tab Internet PrintingLogical Port Printer Tab Logical PortStatus Tab Printer Status Tab DeviceExit Exit TabInternet Printing Protocol Windows IPP Client SetupInstalling using setup.exe IPP Client Configuration for Windows 98, Me, 2000, and XPAddPort Changing the IPP Port SettingsUsing IPP Printers IPP Client Setup for Windows 2000 and XPInternet Printing Protocol Windows IPP Client Setup Bi-Admin Installation Bi-Admin ManagementBi-Admin Installation Connected Protocol Starting the Bi-Admin Management UtilityMenu Options Bi-Admin Management Utility12 Printer Status 14 Verify Password TCP/IP 18 Apple Talk 20 Internet Printing 22 Attached Remote Common Problems and Solutions Appendix a TroubleshootingNeed to upgrade the firmware Appendix B About Bi-Directional Printing Appendix C Upgrading Firmware Figure C-1 Upgrade FirmwareAppendix D Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Appendix E Glossary PrintServer for USB with 4-Port Switch PrintServer for USB with 4-Port Switch PrintServer for USB with 4-Port Switch PrintServer for USB with 4-Port Switch PrintServer for USB with 4-Port Switch Appendix F Specifications Limited Warranty Appendix G Warranty InformationFCC Statement Appendix H Regulatory InformationAppendix I Contact Information