ADIC manual Operation, Switches on the control cabinet

Page 29

4 Operation

In the normal case the host sends the commands to the AML/J. The AMU is used by the operator for control purposes. The operator is responsible for the following tasks:

•Starting the AML/J

•Stopping the AML/J

•Handling the cartridges

You will find information on handling the cartridges under Inserting car- tridges on page 6-4 and Ejecting cartridges on page 6-5. In the case of equipment disturbances the operator can process the cartridges.

4.1Switches on the control cabinet

You will find several switches for switching the components on and off in the control cabinet. In addition to the switches on the front of the con- trol unit, a mains switch is located on the back of the control unit.

Figure 4-1: Control unit on page 4-1 shows a view of the front side of the control unit.

Main switch (S3)	"Control on" button
	(only for HICAP)

Figure 4-1: Control unit

The switches on the control unit are described in Table 4-1: .

4-1

March 31, 1999

Image 29

Contents Operator Guide Page Contents Operation SafetyMenus and commands Processing media Iv Contents DOC D00 025-A Layout of the Guide Introduction ContentsTarget group Bold Explanation of the symbols and notesFurther documentation Adic Technical supportProduct observation March 31 Introduction DOC D00 025-A Host connection Description of the system Overview of the system componentsFunctional units Description of functionAML Management Unit AMU DrivesControl cabinet Hardware components L3 LD Storage cellsHandling unit Technical data of the handling unit6 I/O unit CartridgesWidth x depth Height Technical DataWeight in lbs Weight in kg With Without Media Noise Electrical systemClimatic conditions Europe North AmericaOverview DOC D00 025-A Safety Use as intended Persons Symbol Damage Signal word Definition ConsequencesVoltage Material ElectroQuence Or severe injuries are threateningMain switch System accessScope Protective devicesSafety DOC D00 025-A Switches on the control cabinet Circuit of the main switch Switch DescriptionFollowing are not DrivesStarting the AML/J system Step Stopping the AML/J systemNormal stopping Emergency shutdown System is not deenergized completely with the main switchRestarting the AML/J system AMS the 0DQXDO2SHUDWLRQcommand in the 2SHUDWLRQV Manual operating modePrerequisites Switching over to Dual-AMUAMU Operation DOC D00 025-A Application Button Function Selecting a commandLayout of the menu bar Close window Change size of the windowsMove windows AMS menu overview Menu overviewField Explanation Shutdown menuBefore shutting down stop the communi Cation with the host computer e. g. withTotal System Shutdown window Command Field ExplanationEdit menu RS\Archive View menu0HGLXP \SH Value of this field can be changed Only with a host commandAfter logging in as administrator or This command can be executed onlySupervisor Existing entry is only overwrittenLVWField/commandRI,V-Explanation Time of day Trace ID Trace text Fe?DPX?ORJV. g. DWUF?QDPHor 3 Log RJField/commandDUFKLYH Explanation LVSOD\ fonts Operations menu Operator loginManual Operation Rovhu1DPHfree 6WDWXV Disaster RecoveryAdministrator Login Admin menuLqgrz Window menu23 Help menu Help menu25 Help for AMU AML Management Unit window CommandExplanation+HOSLQGHHelp index Menus and commands DOC D00 025-A Processing media Overview Dynamic Problem ForeignI/O unit/C Unit/C enableInserting cartridges Ejecting cartridges I/O unit/D Hicap Inserting cartridges Ejecting cartridges Two I/O units/E I/O unit/EEjecting cartridges Perform a login in the operator menu Disaster RecoveryStart the ejection with 6WDUW Index Hicap Iii March 31 In-iv Index DOC D00 025-A