Aastra Telecom ATP-CNX-020 Safety warnings, General warnings, Lithium battery caution Compliances

Page 10

Aastra CNX Quick Installation and Setup Guide

Safety warnings

Safety warnings

General warnings

The following safety warnings apply:

•Mechanical hazards and electrical shock hazards are possible if you remove one or more of the modules. There are no operator-serviceable modules. Only qualified personnel should service this equipment.

•This equipment must be connected to a protective ground according to the instructions in this manual. Improper grounding may result in electrical shock.

•This equipment does not provide safety isolation between any port that is connected to a digital network termination point or any port to which terminal equipment is connected.

•The wall circuit breaker provides the main protection for this equipment.

•Ensure that rack installation does not result in airflow blockage to power supply vents or chassis vents.

•Before installing the Aastra CNX rackmount version, ensure that the rack is sturdy and well-secured.

Lithium battery caution

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions.

ATTENTION: Il y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du même type ou d’un type recommandé par le constructeur. Mettre au rebut les batteries usagées conformément aux instructions du fabricant.

Compliances

The Aastra CNX is in compliance with regulations as follows:

•Environmental

•32-104° F (0-40° C)

•Humidity 10-85% non-condensing

•400 BTUs/hour

•28 dBA maximum acoustic noise

•Safety Certifications

•cUL 950, NTRL/UL 1950, TUV EN 60 950

•Telecom Approvals

•FCC Part 68, Industry Canada, CTR4

•EMI/RF

•FCC Part 15 Class A, EN55022 Class A (CISPR), EN55024

x

ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Aastra CNX Conference Network Switch Page Contents Page Warranty Aastra Telecom, Inc Warranty LimitationA. requirements Interface Service Code Facility CodeRegulatory information FCC Part 68 general informationCSA certification U.S. and Canada FCC and telephone company procedures and requirementsCanadian requirements Canada CS-03 rules and regulationsCanada CS-03 Règles et règlements EMI/EN 55 022 statement European requirementsEC declaration of conformity Lithium battery caution Compliances Safety warningsGeneral warnings Software licensing and copyright Page Introduction What does the Aastra CNX do?What is in the Aastra CNX shipping package? Procedures IntroductionPrepare for hardware installation Preparing for the hardware installationInstall the Aastra CNX in a rack Installing the Aastra CNX in a rackConnect to the console Local connectionConnecting the network cables Connect network cablesConnect the power cable Connecting the AC power cableStartup and check the Aastra CNX Starting up and checking the Aastra CNXConfigure the network settings Configuring the network settingsRun network and time configuration Step ActionConfiguring Domain Name Service DNS Domain Name aastra.com GMT Four-digit year 2005 Month Day Hour 19 14 Minutes Procedures Procedures Using the Aastra CNX GUI via the Web Using the Aastra CNX GUI via the WebPage Aastra CNX Conference Network Switch
Top Page Image Contents