Aastra Telecom ATP-CNX-020 Configure the network settings, Configuring the network settings

Page 22

Aastra CNX Quick Installation and Setup Guide

Procedures

Configuring the network settings

7 Configure the network settings

Requirements

The following is required before you configure the Aastra CNX for the first time:

•The Aastra CNX must physically be connected to your console using an RS-232/DB-9 cable.

•The Aastra CNX must physically be connected to your network interface via the Ethernet port(s).

•The Aastra CNX must be turned on.

•You must be running a terminal emulator on your PC. Terminal emulator must be set as follows:

—	Baud Rate	9600
—	Data	8 bit
—	Parity	None
—	Stop	1 bit
—	Flow Control	None

The Aastra CNX setup script allows you to configure the following:

(1) Run network and time configuration

The following procedure describes how to configure the network settings.

Note: If at any time during the initial configuration process, you want to backout of the configuration, press <ESC> to cancel.

8	ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06

Image 22

Contents Aastra CNX Conference Network Switch Page Contents Page Warranty Aastra Telecom, Inc Warranty LimitationA. requirements Interface Service Code Facility CodeRegulatory information FCC Part 68 general informationCSA certification U.S. and Canada FCC and telephone company procedures and requirementsCanadian requirements Canada CS-03 rules and regulationsCanada CS-03 Règles et règlements EMI/EN 55 022 statement European requirementsEC declaration of conformity Lithium battery caution Compliances Safety warningsGeneral warnings Software licensing and copyright Page Introduction What does the Aastra CNX do?What is in the Aastra CNX shipping package? Procedures IntroductionPrepare for hardware installation Preparing for the hardware installationInstall the Aastra CNX in a rack Installing the Aastra CNX in a rackConnect to the console Local connectionConnecting the network cables Connect network cablesConnect the power cable Connecting the AC power cableStartup and check the Aastra CNX Starting up and checking the Aastra CNXConfigure the network settings Configuring the network settingsRun network and time configuration Step ActionConfiguring Domain Name Service DNS Domain Name aastra.com GMT Four-digit year 2005 Month Day Hour 19 14 Minutes Procedures Procedures Using the Aastra CNX GUI via the Web Using the Aastra CNX GUI via the WebPage Aastra CNX Conference Network Switch