Aastra Telecom ATP-CNX-020 setup guide Procedures

Aastra CNX Quick Installation and Setup Guide

Procedures

Step Action

15Enter “y” if the date and time are correct, and press <Enter>. Enter “n” if the date and time are incorrect, and press <Enter>.

Note: If you entered “n” at the verification prompt, repeat step 14 to correct the date and time, and then enter “y” at step 15.

The following message displays (after entering “y” at the verification prompt):

Configuring Network Time Protocol (NTP)...

You can configure up to 4 NTP servers. To remove an existing server, set it's address to 0.0.0.0. If no valid servers are given then ntp will be disabled.

Do you want to continue (y/n) [n]:

16Enter “y” to continue, and press <Enter>. The following prompts display:

NTP Server #1: [pool.ntp.org]:

NTP Server #2: [pool.ntp.org]:

NTP Server #3: [pool.ntp.org]:

NTP Server #4: [pool.ntp.org]:

(continued)

14 ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06