Aastra Telecom ATP-CNX-020 Install the Aastra CNX in a rack, Installing the Aastra CNX in a rack

Aastra CNX Installation and Setup Procedures

Procedures

Installing the Aastra CNX in a rack

2 Install the Aastra CNX in a rack

Warning: Before you install the Aastra CNX unit in a rack, ensure that the rack is sturdy and well secured.

Caution: The operating environment must provide unobstructed front-to-back airflow to the chassis mounted in a rack.

To install an Aastra CNX in a rack:

a.Mount the rackmount brackets to the

Aastra CNX unit in a flush-mount position using

the 6 Phillips head screws.

b. Align the bracket holes to the rack and insert truss-head screws (not provided).

c. Tighten the screws to 15 in-lb (.69 Nm).

	1	2	3	4			CNX
POWER	1 2			￿ACTIVE
STATUS				ALARM
	10/100 ENET	T1 / E1		1	COMPACTFLASH	2

ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 3