Adder Technology AdderLink IP manual To perform the initial local configuration, Admin password

To perform the initial local configuration

1 Edit the Unit config screen. The key elements here are:

3 If necessary, edit the Modem config screen.

AdderLink IP Unit Config

Hardware		Rev	1
Firmware		Version 1.4
Keybd	Layout	UK
Admin	Passwd
Unit	Name
Hot Keys		Ctrl+Alt
Screensaver		10	mins
Time		21 : 27 : 31
Date		15	Apr	2004
Encryption		Prefer Off

Save

Admin password

Enter a password of at least six characters that has a mix of letters and numerals. The background colour provides an indication of password suitability and is initially red to indicate that the password is not sufficient. When a password with reasonable strength has been entered it changes to blue.

Time and Date

Set these correctly as all entries in the activity log are time stamped using them.

AdderLink IP Modem Config

Server IP 192.168.3.1

Client IP 192.168.3.2

Baud Rate 115200

Init String ATZHS0=1

Initialize Port

Restore Defaults

Save

The default items here are perfectly adequate for the majority of modem and ISDN terminal adapter installations.

The Server IP and Client IP addresses are used to form an isolated two-device PPP network connection via the dial up link. Their settings are not related to any other ‘real’ network settings within the AdderLink IP.

 

Encryption

Arrange this setting according to your security requirements. See Encryption settings for a description of the issues and the settings.

When all items are correct, select the Save option to display the next screen.

4 Move the mouse and enter changing key sequences within this screen.



When all items are correct, select the Save option to display the next screen.

2 Edit the Network config screen. The key elements here are:

AdderLink IP Secure Keys

Random data is required to generate encryption keys

AdderLink		IP Network Config
MAC	Address	00:0F:58:00:00:04
Use	DHCP	No
IP Address		192.168.42.154
Net	Mask	255.255.255.0
Gateway
VNC	Port	5900
HTTP	Port	80

Save

Use DHCP/IP address/Net Mask/Gateway

You need to either set the DHCP option to ‘Yes’ or manually enter a valid IP address, Net mask and Gateway. See Networking issues for more details.

VNC and HTTP ports These should remain set to 5900 and 80, respectively, unless they clash with an existing setup within the network. See Networking issues for more details.

for secure VNC access Please move the mouse or press keys until the bar becomes full

With every mouse move and keypress, the single dash will move across the screen (unless the same key is pressed repeatedly). Periodically, a new star character will be added to the bar as the random data is accepted as part of the new encryption key. When the bar is full, the final encryption keys for your AdderLink IP will be created – this process takes roughly 30 to 40 seconds.

 



When all items are correct, select the Save option to display the next screen.

continued

12