Adder Technology AdderLink IP manual Performing a flash upgrade, To perform a flash upgrade

Page 22

Performing a flash upgrade

AdderLink IP is fully reconfigurable via flash upgrade

To perform a flash upgrade

1 Using a remote connection, log on as the admin user and access the Unit configuration page to determine the current firmware version of the AdderLink IP unit.

2

Visit the Adder website, locate the downloads section and select an

Configure network option

 

AdderLink IP firmware revision that is later than the one currently installed.

 

 

3

Power down the AdderLink IP unit. At the rear of the unit, adjacent to the

 

 

power input socket, click mini switch 1 to its ON (down) position.

 

MAC address

Media Access Control address – this is the unique and unchangeable code that



4Re-apply power to the AdderLink IP. On the locally connected monitor you should see a Maintenance menu:

AdderLink

IP

Maintenance

 

To upgrade

unit, visit:

 

http://192.168.42.154

 

Configure

Network

Current network

address of the

 

 

 

Reset Configuration

AdderLink IP

 

Put option switch 1 up to return to normal operation.

The Maintenance menu should display the current network address of the AdderLink IP.

•If the current network address is incorrect then select the ‘Configure network’ option to change it:

5Use the web browser (not the VNC viewer) on the previously used remote system, connect to the network address shown in the local Maintenance menu and log on as the admin user.

6Follow the on screen instructions to upload the firmware file (previously obtained from the Adder site) to the AdderLink IP.

AdderLink

IP Network Config

MAC

Address

00:0F:58:00:00:04

Use

DHCP

No

IP

Address

192.168.42.154

Net

Mask

255.255.255.0

Gateway

 

OK

was hard coded within your AdderLink IP unit when it was built. It consists of six 2-digit hexadecimal (base 16) numbers separated by colons. A section of the MAC address identifies Adder Technology as the manufacturer, while the remainder is effectively the unique electronic serial number of your particular unit.

Use DHCP

When this option is selected, your AdderLink IP will attempt to locate a DHCP server on the network. If such a server is located, it will supply three things to the AdderLink IP: an IP address, an IP network mask (also known as a Subnet mask) and a Gateway address.

IP address

This is the identity of the AdderLink IP within a network. It can either be entered manually or configured automatically using the DHCP option. When the DHCP option is enabled, this entry is greyed out.

Net mask

Also often called the ‘subnet-mask’, this value is used alongside the IP address to help define a smaller collection (or subnet) of devices on a network. In this way a distinction is made between locally connected devices and ones that are reachable elsewhere, such as on the wider Internet.

  



IMPORTANT: Wait until the upgrade is complete.

7When the upload is complete and confirmed on screen, log off the remote system and then power down the AdderLink IP.

8At the rear of the unit, return the mini switch 1 to its OFF position and then re-apply power.

Gateway

This is the address of the device that links the local network (to which the AdderLink IP is connected) to another network such as the Internet. Usually this is a network switch or router and it will be used whenever a device to be contacted lies outside the local network.

21

Page 21 Page 23
Image 22
Page 21 Page 23
Contents AdderLink IP Contents Index Modem/ISDN port Four simultaneous remote usersLocal user IP network/InternetAdderView IP features front and rear What’s in the box What you may additionally need    Double unit rack brackets MountingSingle unit rack brackets  Host computer or KVM switch ConnectionsTo connect a local keyboard, video monitor and mouse Local keyboard, video monitor and mouseIP network port To connect the IP network portModem/ISDN port Power supply connectionTo connect the power supply To connect a modem or Isdn portPower control port To connect and address the switch boxesPart 1 Local configuration Initial configurationPart 1 Local configuration Part 2 Remote configurationTime and Date To perform the initial local configurationAdmin password EncryptionViewer encryption settings Encryption settingsAdderLink IP encryption settings EncryptionHot plugging and mouse restoration Which restore setting do I use?To restore mouse operation when hot plugging Recognising an IntelliMouse-style mouseTo invoke a configuration reset by switch Resetting the configurationAdderLink IP asks for an unknown admin password AdderLink IP does not display the configuration sequencePart 2 Remote configuration To perform the remote configurationPositioning AdderLink IP in the network Networking issuesPort settings Placing AdderLink IP behind a firewallDNS addressing AddressingTo discover a DHCP-allocated IP address Firewall/router addressEnsuring sufficient security Placing AdderLink IP alongside the firewallPorts To configure the power sequences for each host computer Power switching configurationPower control sequences To control two or more ports simultaneouslyConfigure network option Performing a flash upgradeTo perform a flash upgrade Important Wait until the upgrade is completeTo make a local connection Connecting to the AdderLink IPLocal connection To view the local control menuRemote connections To avoid the ‘hall of mirrors’ effectRemote connection by VNC viewer To connect using the VNC viewerTo connect using your Web browser Remote connection by Web browserWhen using the viewer window Using the viewer windowMenu bar Host selection ConfigureMouse pointers To select a hostAuto calibrate Access mode shared/privatePower control Re-synchronise mouseControls Contrast Setting the Threshold manuallyPhase  Downloading VNC viewer from the AdderLink IP Connecting via dial up modem or Isdn linkIf you need to enter a port number Windows Viewer encryption settingsSupported web browsers LinuxGetting assistance TroubleshootingWhen logging on using VNC viewer, I cannot enter a username US +1 888 275Appendix 1 Local configuration menus To access the local configuration menusUnit configuration Network configuration Modem configuration Reset configuration To reset the AdderLink IP configurationWhat is IP access control? Clear IP access controlTo clear IP access control Auto select Appendix 2 VNC viewer connection optionsColour/Encoding Preferred encodingInputs MiscSave as defaults DefaultsReload defaults Save configuration file asAppendix 3 VNC viewer window options Encoding and colour level Appendix 4 Browser viewer optionsSecurity To access the remote configuration menus Appendix 5 Remote configuration menusMain configuration menu Logged on users User accounts Firmware Version Screensaver timeoutHardware Version Host Keyboard LayoutProtocol timeout Advanced unit configurationIdle timeout Force VNC protocolIP network mask IP access controlIP gateway To reorder access control entries Setting IP access controlTo define a new IP access control entry To edit/remove access control entriesPower control port Serial port configurationModem port Host configuration To create a new host entryOccurred Click to clear All log entries Refresh Logging and statusTo copy and paste the log ListIP addresses Appendix 6 Addresses, masks and portsNet masks Binary equivalent Net masks the binary explanationInside a bit-wise and function Binary octet afterAll locations Calculating the mask for IP access controlSingle locations Address rangesPorts Security issues with portsRouter/firewall address AdderLink IP to power switch cable Appendix 7 Cable and connector specificationsRS232 serial mouse to PS/2 converter cable Appendix 8 Hotkey sequence codes Safety information WarrantyOther products in the Adder range European EMC directive 89/336/EEC Radio Frequency EnergyFCC Compliance Statement United States United States of America Index 

AdderLink IP specifications

Adder Technology's AdderLink IP is a cutting-edge solution designed to extend and manage KVM (Keyboard, Video, Mouse) signals over IP networks. This innovative technology facilitates the remote access and control of computers and servers, making it an essential tool for organizations that require efficient management of their IT resources.

One of the main features of AdderLink IP is its ability to transmit high-resolution video signals with minimal latency. Supporting resolutions up to 4K at 60Hz, it ensures that users experience clarity and responsiveness that is comparable to direct connections. This capability is crucial for industries such as broadcasting, media production, and any environment where graphics-intensive applications are commonplace.

The AdderLink IP employs advanced digitization techniques to ensure high-quality video transmission over standard IP networks. Its use of H.264 video compression allows for efficient bandwidth usage while maintaining image integrity. With this feature, users can easily adapt to various network conditions without compromising performance.

Another standout characteristic is the support for real-time remote access through a web browser, allowing users to connect to their systems from virtually anywhere in the world. Whether for troubleshooting, maintenance, or system management, the AdderLink IP empowers IT professionals with the flexibility they need to perform their duties effectively. The built-in security protocols ensure that access is both secure and reliable.

Moreover, AdderLink IP is designed to be user-friendly. Configuration and management can be performed via an intuitive web interface, simplifying the setup process for users of all technical skill levels. Compatibility with a range of operating systems and devices further enhances its versatility.

Furthermore, the system supports multi-user access, enabling multiple operators to connect to the same devices simultaneously without conflicts. This functionality is particularly useful in collaborative environments where teams need concurrent access to critical systems.

In summary, Adder Technology's AdderLink IP stands out as a robust solution for KVM over IP needs. With its high-quality video transmission, real-time remote access, ease of use, and enhanced security features, it enables organizations to effectively manage their IT infrastructure, thereby boosting productivity and operational efficiency. As the demand for remote access increases, AdderLink IP remains a pivotal component in the evolution of IT management solutions.
Top Page Image Contents