
W e b S i t e s w i t h R F I D I n f o r m a t i o n
AIM Global
The association for Automatic Identification and Mobility.
EPCglobal, Inc.™
A joint venture between EAN International and the Uniform Code Council, Inc., creating RFID standards for the Electronic Product Code™ (EPC).
RFID Journal
An independent media company specializing in RFID.
Uniform Code Council, Inc.→
A global standards organization in supply chain management.
Avicon
Provides software to translate legacy codes to electronic product codes (EPC) for Class 1
www.aimglobal.org
www.epcglobalinc.org
www.rfidjournal.com
www.epctranslator.com
C o n n e c t i n g t h e C a b l e s
The power supply automatically switches between 115V or 230V. There are no operator settings required.
1. Plug the power cable into the socket. Plug the other end of the cable into a grounded electrical outlet.
2. Connect the communication cable into the appropriate port.
Secure the cable with the connecting screws (serial) or spring clips (parallel).
If you are communicating with the host through the serial port, make sure the printer's communication values match those at the host. The factory default values are 9600 Baud, 8 bit data frame, 1 stop bit, no parity, and DTR flow control (9600, N, 8, 1, DTR). Set the communication values on the printer to match those at the host.
The printer also has a USB (Universal Serial Bus) version 2.0 communications port, which is compatible with
version 1.1. Drivers are available on our Web site
for a variety of operating systems.
3. Turn on the printer. Press ( I ) to turn on and ( O ) to turn off the printer.
Power Cable
Goes Here
2