Paxar 9855 RFID manual I n g t h e C o n t r o l P a n e l, Power, Fault, Feed/Cut, Enter/Pause

U s i n g t h e C o n t r o l P a n e l

The control panel has a two-line LCD display, two status lights, and five buttons. The control panel displays error codes/messages, and allows you to setup/configure the printer.

Power:	The printer shows a steady green
	light when it is on.
Fault:	The printer shows a steady amber
	light when it is out of labels or
	ribbon, or when you have a supply
	jam.
Feed/Cut:	Prints a label in the on-demand
	mode, feeds a blank label if there is
	no print job, and prints a label with
	error information that is useful to
	your System Administrator if an error is displayed. When the
	printer is offline, changes the displayed value by one or ten.
Enter/Pause:	Pauses the current print job or resumes a paused print job.
	Selects the displayed menu item.

Escape/Clear: When an error is present, clears the error. When a job (batch) is

	printing, cancels the print job (batch). Enters the offline menu
	mode or returns the display to the next higher menu.
Å	Displays the previous menu item.
Æ	Displays the next menu item.

Åand Æ Prints a test label when you press the buttons at the same time. Hold for one second and release.

3