RuggedCom RX1501 manual Ieee 1613 C37.90.x EMI Immunity Type Testsa, Test Description Test Levels

5. EMI And Environmental Type Tests

Test		Description		Test Levels
IEEE C37.90.3	ESD		Enclosure Contact	+/-2kV, +/-4kV, +/- 8kV
			Enclosure Air	+/-4kV, +/-8kV, +/-15kV
IEEE C37.90.2	Radiated RFI		Enclosure ports	35 V/m
			Signal ports	+/- 4kV @ 2.5kHz
IEEE C37.90.1	Fast Transient		D.C. Power ports	+/- 4kV
			A.C. Power ports	+/- 4kV
			Earth ground ports	+/- 4kV
			Signal ports	2.5kV common mode @1MHz
IEEE C37.90.1	Oscillatory		D.C. Power ports	2.5kV common, 1kV diff. mode@1MHz
			A.C. Power ports	2.5kV common, 1kV diff. mode@1MHz
			Signal ports	5kV (Fail-Safe Relay output)
IEEE C37.90	H.V. Impulse		D.C. Power ports	5kV
			A.C. Power ports	5kV
			Signal ports	2kVAC
IEEE C37.90	Dielectric Strength		D.C. Power ports	1.5kVDC
			A.C. Power ports	2kVAC

aMeets Class 2 requirements for an all-fiber configuration. Meets Class 1 requirements for copper ports.

Table 5.2. IEEE 1613 (C37.90.x) EMI Immunity Type Testsa

Test	Description		Test Levels
IEC 60068-2-1	Cold Temperature	Test Ad	-40°C, 16 Hours
IEC 60068-2-2	Dry Heat	Test Bd	+85°C, 16 Hours
IEC 60068-2-30	Humidity (Damp Heat, Cyclic)	Test Db	95% (non-condensing), 55°C , 6 cycles
IEC 60255-21-1	Vibration		2g @ (10 - 150) Hz
IEC 60255-21-2	Shock		30g @ 11mS

Table 5.3. Environmental Type Tests

RuggedCom® RuggedBackbone™ 44 RX1501 Installation Guide Rev 104