RuggedCom RX1501 manual Line Modules LM, Ethernet Copper, Ethernet Fiber

2. RuggedBackbone™ Modules

2.2. Line Modules (LM)

The RuggedBackbone™ RX1501 supports six line modules in slots LM1 through LM6 . Several types of line modules may be ordered, depending on the type, speed, and number of Ethernet ports required.

The following illustrations show the typical port configurations and connectors available for RX1501 line modules. For complete information on the available line modules, refer to the RuggedBackbone™ RX1501 data sheet.

Only one T1/E1 module may be used per router.

On the RX1501, 2-port modules can only be inserted in LM1 and LM2.

2.2.1. Ethernet - Copper

Figure 2.3. CG01: 2 × 10/100/1000TX RJ45 Figure 2.4. 6TX01: 6 × 10/100/1000TX RJ45

2.2.2. Ethernet - Fiber

Figure 2.5. FX**/FG**: 2 × 100FX/1000SX/1000LX LC Figure 2.6. 4FX**: 4 × 100FC LC

Figure 2.7. FX03: 2 × 100 FX MTRJ Figure 2.8. 4FX03: 4 × 100FX MTRJ

Figure 2.9. FX**: 2	× 100FX SC	Figure 2.10. FX**: 2 × 100FX ST
Figure 2.11. 10FL:	3 × 10FL ST

RuggedCom® RuggedBackbone™ 14 RX1501 Installation Guide Rev 104