2.4 ALTERNATE MICROPHONES AND INSTALLATION
For best results, the user should select a low impedance dynamic type microphone or a transistorized microphone. Transistorized type microphones have a low output impedance characteristic. The microphones must be provided with a
The microphone should provide the functions shown in the schematic below (Figure
4 WIRE MIC CABLE
Pin Number | Mic Cable Lead |
1Audio Shield
2Audio Lead
3Transmit Control
4Receive Control
Figure 2-3 Your Transceiver Microphone Schematic
Figure 2-4 Microphone plug and pin numbers viewed from rear of pin receptacle.
- 8 -