Rosewill RPLC-500 user manual Device Name, MAC Address, Password

Page 13

500Mbps Powerline Gigabit Ethernet Adapter KIT

- RPLC-500KIT-

User’s Manual

 

 

 

 

discovered in the current logical network. The total number of remote devices connected in the same network is displayed above the remote device panel. Network type (Public or Private) depends on the network status of the local device. Autoscan shows whether the autoscan function is on. The following information is displayed for all the devices that appear in the lower panel.

Device Name

This column shows the default device name, which may be modified. To change the name, click Rename, or click the name and edit it in the list.

MAC Address

This column shows the MAC addresses of the remote devices.

Password

By default, this column is blank. You can click Enter Password to change it. The steps for setting the password of the device (required when creating a private network) are as follows:

Click the device name to select the device in the lower panel.

Click Enter Password. A dialog box appears, showing the device name and password.

Click OK to verify the password. The password field accepts the device

-13-

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 500Mbps Powerline Gigabit Ethernet Adapter Contents Package Contents Introduction to Hardware Key FeaturesExpanding your Network with RPLC-500 Application  Green Feature for Power saving mode QoS Management Enhances Streaming Quality System Requirement Hardware Diagram of RPLC-5001 LED Powerline Adapter’s Button and ConnectorColor Behavior Description Introduction to Utility Utility Installation500Mbps Powerline Gigabit Ethernet Adapter KIT 500Mbps Powerline Gigabit Ethernet Adapter KIT 500Mbps Powerline Gigabit Ethernet Adapter KIT Main Tab Utility IntroductionDevice Name PasswordMAC Address Scan AddSet Local Device Only Privacy TabSet All Devices Diagnostics Tab500Mbps Powerline Gigabit Ethernet Adapter KIT About Tab Forming a Powerline HomePlug AV NetworkUsing the Utility Using the Security PushbuttonScenario Forming a HomePlug AV logical networkNetwork name setting success Setting the network name for your PLCSearch for Local device on your computer Joining a network Joining a NetworkDevice C will flash unevenly for 2 minutes Appendix a Improving the Transmission Quality Appendix B SpecificationsPowerline Range Powerline SpeedsPower Consumption DimensionsAppendix D RPLC-500 QoS Support Appendix C Acronyms and AbbreviationsCCo Vlan Tag User Default CAP TOS Bit User Priority Default CAPCopyright & Trademarks
Top Page Image Contents