Rosewill RPLC-500 1 LED, Powerline Adapter’s Button and Connector, Color Behavior Description

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT-User’s Manual

1.5.1 LED

LED	Color	Behavior	Description
	Green	On	System runs normally.
	Green	Blink	 System is resetting.
(Power)			 System is in the process of
			password synchronization.
			 System is in Power Saving mode
	-	Off	The PLC adapter is powered off.
	Green	On	Ethernet connection has established.
		Blink	Data is being transmitted.
(Ethernet)
	-	Off	No Ethernet connection.
	Green/Orange/Red	On	The PLC adapter has connected to the
			powerline network. The Data LED color
(Data)			may vary according to the Data
			Transmit Quality.
			Green: Data Transmit Quality Excellent
			Orange: Data Transmit Quality Average
			Red: Data Transmit Quality Poor
	-	Off	The PLC adapter does not connect to
			the powerline network.

1.5.2 Powerline Adapter’s Button and Connector

Reset: Pressing and holding the Button for between 10 seconds and 15 seconds makes the adapter restore the factory default settings.

Security: Pressing and holding the button for less than 3 seconds makes the adapter a member of the existing Powerline Network.

Ethernet Port (RJ45 Port): The Ethernet port connects to an Ethernet network cable. The other end of the cable connects to your computer or other Ethernet-enabled network device.

Connecting to the router/modem: Insert One end of the RJ45 Cable (Recommend using Cat 5E cable or above) to this port, and the other end to the router or modem. Then plug into the electrical outlet.

-7-