500Mbps Powerline Gigabit Ethernet Adapter KIT | - | User’s Manual | |
|
|
|
|
Please follow below to form a logical network using the Utility:
1.Connect Device A to the network card of a PC.
2.Open the Utility. The Main tab page displays information about Device A after connection succeeds.
Search for Local device on your computer
3.Click the Privacy tab page. Enter a name in the Private Network Name field.
Setting the network name for your PLC
4.Click Set Local Device Only. When the following page is displayed, the setting succeeds. Now Device A has been removed from its logical network.
Network name setting success
5.Repeat the procedures above to configure Device B. Configure Device