Rosewill RPLC-201P Change Local NPW, To remove a local device from its existing network, Click OK

Page 21

200Mbps Powerline Pass-Through Fast Ethernet Adapter KIT

- RPLC-201PKIT-

User’s Manual

 

 

 

 

Change Local NPW

The Change NPW button is used to remove a local device from its existing network or add a local device to another network by changing the NPW for the local device. All devices are shipped with a default NPW (“HomePlugAV”). Devices with the same NPW are located in the same network.

To remove a local device from its existing network:

Step 1 Select a local device in the top panel and click Change Local NPW.

Step 2 In the screen displayed, set a network password different from that of the local device‟s existing network.

Step 3 Click OK.

After the network password for the local device is changed successfully, this local device is removed from its existing network. Previous devices displayed on the lower panel will disappear and devices with the same NPW as this local device will appear on the lower panel.

To add a local device into a network:

Step 1 Select a local device in the top panel and click Change Local NPW. Step 2 In the screen displayed, set the network password the same as that of

the network this device is to add into. Step 3 Click OK.

After the network password for the local device is changed successfully, this local device is added into the target network. Previous devices displayed on the lower

-21-

Page 20 Page 22
Image 21
Page 20 Page 22
Contents RPLC-201P Contents Package Contents Key Features Introduction to HardwareExpanding your Network with RPLC-201P  Green Feature for Power saving mode  Extra Power Outlet for more ConvenienceApplication System Requirement Hardware Diagram of RPLC-201PColor Behavior Description Reset/SecurityRPLC-201PKIT Introduction to Utility Utility InstallationRPLC-201PKIT  Note RPLC-201PKIT RPLC-201PKIT RPLC-201PKIT RPLC-201PKIT Click Install to start installing Powerline Utility Main Tab How to Use Powerline Utility Note Password Device NameMac Address Change NPW Network Password To remove a local device from its existing network Change Local NPWClick OK To add a local device into a networkClick Firmware Upgrade Firmware UpgradeScan Information TabAbout Tab Preferences Forming a HomePlug AV logical network How to Use the Security/Reset PushbuttonScenario Forming a HomePlug AV logical networkLeaving a Network Joining a NetworkLeaving a network Appendix a Improving the Transmission Quality Appendix B Specifications Weight DimensionsTemperature ContentsCCo Appendix C Acronyms and AbbreviationsAppendix D RPLC-201P QoS Support Default CAPCopyright & Trademarks Federal Communication Commission FCC Interference Statement
Top Page Image Contents