Rosewill RPLC-201P user manual Leaving a network

Page 27

200Mbps Powerline Pass-Through Fast Ethernet Adapter KIT		- RPLC-201PKIT-	User’s Manual

Leaving a network

1.Press the Security/Reset pushbutton on device C (the „leaver‟) for 5-8 seconds. The device will reset and restart with a random NMK.

2.Wait for reset to complete.

The Power indicator on device C momentarily extinguishes during reset, blinks during restart, and then illuminates steadily.

After device C is removed from its existing network, users can disconnect the device from the medium or join it to another logical network on the same medium

-27-

Image 27

Contents RPLC-201P Contents Package Contents Key Features Introduction to HardwareExpanding your Network with RPLC-201P  Green Feature for Power saving mode  Extra Power Outlet for more ConvenienceApplication System Requirement Hardware Diagram of RPLC-201PColor Behavior Description Reset/SecurityRPLC-201PKIT Introduction to Utility Utility InstallationRPLC-201PKIT  Note RPLC-201PKIT RPLC-201PKIT RPLC-201PKIT RPLC-201PKIT Click Install to start installing Powerline Utility Main Tab How to Use Powerline Utility Note Password Device NameMac Address Change NPW Network Password To add a local device into a network Change Local NPWTo remove a local device from its existing network Click OKInformation Tab Firmware UpgradeClick Firmware Upgrade ScanAbout Tab Preferences Forming a HomePlug AV logical network How to Use the Security/Reset PushbuttonForming a HomePlug AV logical network ScenarioLeaving a Network Joining a NetworkLeaving a network Appendix a Improving the Transmission Quality Appendix B Specifications Contents DimensionsWeight TemperatureCCo Appendix C Acronyms and AbbreviationsAppendix D RPLC-201P QoS Support Default CAPCopyright & Trademarks Federal Communication Commission FCC Interference Statement