Rosewill RPLC-201P user manual Copyright & Trademarks

Page 33

200Mbps Powerline Pass-Through Fast Ethernet Adapter KIT

- RPLC-201PKIT-

User’s Manual

 

 

 

 

COPYRIGHT & TRADEMARKS

Specifications are subject to change without notice. is a registered trademark of Rosewill Inc. Other brands and product names are trademarks or registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from Rosewill Inc. Copyright © 2010 Rosewill Inc. All rights reserved.

http://www.rosewill.com

Safety Warning

This device is intended for connection to the AC powerline. For installation instructions, please refer to the installation section of this guide. The following precautions should be taken when using this product.

Read all instructions before installing and operating this product.

Follow all warnings and instructions marked on the product.

Unplug the device from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid cleaners or aerosol cleaners.

Do not operate this product near water.

This product should never be placed near or over a radiator or heat register.

Do not use an extension cord between the device and the AC power source.

Only a qualified technician should service this product. Opening or removing covers may result in exposure to dangerous voltage points or other risks.

Do not plug the device into a power strip or surge protector because these devices may consist of filter and impair signal.

Avoid plugging the device right next to noisy sources such as cell phone charger, Halogen light, noisy desktop computer, vacuum cleaner, etc. These cases result in poor transmission speed.

Unplug the device from the wall outlet and refer the product to qualified service personnel for the following conditions:

If liquid has been spilled into the product

If the product has been exposed to rain or water

If the product does not operate normally when the operating instructions are followed

If the product exhibits a distinct change in performance

-33-

Image 33
Contents RPLC-201P Contents Package Contents Key Features Introduction to HardwareExpanding your Network with RPLC-201P  Green Feature for Power saving mode  Extra Power Outlet for more ConvenienceApplication System Requirement Hardware Diagram of RPLC-201PColor Behavior Description Reset/SecurityRPLC-201PKIT Introduction to Utility Utility InstallationRPLC-201PKIT  Note RPLC-201PKIT RPLC-201PKIT RPLC-201PKIT RPLC-201PKIT Click Install to start installing Powerline Utility Main Tab How to Use Powerline Utility Note Password Device NameMac Address Change NPW Network Password To remove a local device from its existing network Change Local NPWClick OK To add a local device into a networkClick Firmware Upgrade Firmware UpgradeScan Information TabAbout Tab Preferences Forming a HomePlug AV logical network How to Use the Security/Reset PushbuttonScenario Forming a HomePlug AV logical networkLeaving a Network Joining a NetworkLeaving a network Appendix a Improving the Transmission Quality Appendix B Specifications Weight DimensionsTemperature ContentsCCo Appendix C Acronyms and AbbreviationsAppendix D RPLC-201P QoS Support Default CAPCopyright & Trademarks Federal Communication Commission FCC Interference Statement