Rosewill RPLC-201P user manual Joining a Network, Leaving a Network

Page 26

200Mbps Powerline Pass-Through Fast Ethernet Adapter KIT

- RPLC-201PKIT-

User’s Manual

 

 

 

 

3.2 Joining a Network

Scenario:

Devices A and B are located in network N. Users want to add device C (the joiner) into network N. Any devices on network N can become the „adder‟.

Joining a network

Please follow below to add Device C to Network N using the Security button:

1.Press the Security/Reset pushbutton on device C (the joiner) for 5-8 seconds. The device will reset and restart with a random NMK.

2.Press the Security/Reset button on device C (the „joiner‟) for less than 3 seconds.

3.Within 30 seconds, press the Security/Reset button on device A (or device B) for less than 3 seconds.

4.Wait for connection to complete.

The power indicator on both devices will flash evenly at 1 second intervals until the operation succeeds or fails. If the connection succeeds, the Power and Data indicators on both devices illuminate steadily. If the connection fails, the Power indicators on both devices keep steady on, but the Data indicators on both devices are off. In that case, repeat steps 1-4.

3.2 Leaving a Network

Scenario:

Device C is located in a network. Users want to remove device C (the „leaver‟) from its network.

-26-

Image 26
Contents RPLC-201P Contents Package Contents Expanding your Network with RPLC-201P Key FeaturesIntroduction to Hardware Application  Green Feature for Power saving mode Extra Power Outlet for more Convenience Hardware Diagram of RPLC-201P System RequirementReset/Security Color Behavior DescriptionRPLC-201PKIT Utility Installation Introduction to UtilityRPLC-201PKIT  Note RPLC-201PKIT RPLC-201PKIT RPLC-201PKIT RPLC-201PKIT Click Install to start installing Powerline Utility How to Use Powerline Utility Main Tab Note Mac Address PasswordDevice Name Change NPW Network Password Click OK Change Local NPWTo remove a local device from its existing network To add a local device into a networkScan Firmware UpgradeClick Firmware Upgrade Information TabAbout Tab Preferences Scenario How to Use the Security/Reset PushbuttonForming a HomePlug AV logical network Forming a HomePlug AV logical networkJoining a Network Leaving a NetworkLeaving a network Appendix a Improving the Transmission Quality Appendix B Specifications Temperature DimensionsWeight ContentsAppendix C Acronyms and Abbreviations CCoDefault CAP Appendix D RPLC-201P QoS SupportCopyright & Trademarks Federal Communication Commission FCC Interference Statement