Rosewill RPLC-201P user manual Scan, Click Firmware Upgrade, Information Tab

Page 22

200Mbps Powerline Pass-Through Fast Ethernet Adapter KIT

- RPLC-201PKIT-

User’s Manual

 

 

 

 

panel will disappear and devices in the target network will appear on the lower panel.

Scan

The Scan button is used to perform an immediate search for HomePlugAV devices connected to the powerline network. By default, Powerline Utility automatically scans every a few seconds and updates the displayed information.

Firmware Upgrade

The Firmware Upgrade button is used to upgrade the device firmware.

Note:

Only devices that have their password verified can achieve firmware upgrade by clicking Firmware Upgrade.

The steps for upgrading firmware are as follows:

Step 1 Select a local device from the top panel.

Step 2 Click Firmware Upgrade.

Step 3 Click Browse to choose a configuration file (fw_upgrade, bin-upgrade, or paramconfig).

Step 4 Click OK.

It takes several minutes to complete firmware upgrade. Do not interrupt the upgrade process.

2.2.2 Information Tab

The Information screen shows the system information and the firmware version.

-22-

Page 21 Page 23
Image 22
Page 21 Page 23
Contents RPLC-201P Contents Package Contents Introduction to Hardware Key FeaturesExpanding your Network with RPLC-201P  Extra Power Outlet for more Convenience  Green Feature for Power saving modeApplication Hardware Diagram of RPLC-201P System RequirementReset/Security Color Behavior DescriptionRPLC-201PKIT Utility Installation Introduction to UtilityRPLC-201PKIT  Note RPLC-201PKIT RPLC-201PKIT RPLC-201PKIT RPLC-201PKIT Click Install to start installing Powerline Utility How to Use Powerline Utility Main Tab Note Device Name PasswordMac Address Change NPW Network Password Click OK Change Local NPWTo remove a local device from its existing network To add a local device into a networkScan Firmware UpgradeClick Firmware Upgrade Information TabAbout Tab Preferences Scenario How to Use the Security/Reset PushbuttonForming a HomePlug AV logical network Forming a HomePlug AV logical networkJoining a Network Leaving a NetworkLeaving a network Appendix a Improving the Transmission Quality Appendix B Specifications Temperature DimensionsWeight ContentsAppendix C Acronyms and Abbreviations CCoDefault CAP Appendix D RPLC-201P QoS SupportCopyright & Trademarks Federal Communication Commission FCC Interference Statement
Top Page Image Contents