Rosewill user manual Appendix D RPLC-201P QoS Support, Default CAP

Page 32

200Mbps Powerline Pass-Through Fast Ethernet Adapter KIT

- RPLC-201PKIT-

User’s Manual

 

 

 

 

Appendix D: RPLC-201P QoS Support

RPLC-201P allows for 4 levels of Channel Access Priority (CAP (0 – 3)). The 8 levels of VLAN Ethernet tags must be mapped to the 4 levels of CAP priority, where CAP 3 is the highest priority and CAP 0 is the lowest. CAP 3 priority might be used for voice and network management frames, and CAP 2 is used for streaming HD video and music while CAP 1 and CAP 0 are used for data.

Default CAP

The „Default CAP‟ group allows for default priority mapping of packets that do not

have a VLAN TAG. The settings are available for Unicast (directed to a host).

Unicast - (default CAP 1) - sets the default channel access priority for unicast frames not matching any other classification or mapping.

IGMP managed Multicast Stream (Fixed to CAP 2) - sets the default channel access priority for stream data belonging to a snooped IGMP multicast group.

IGMP - (default CAP 3) - sets the channel access priority for IGMP frames - these are the group management frames, not the stream data.

Multicast/Broadcast - sets the default CAP for multicast frames not in a snooped group and for broadcast frames.

The following are the factory fixed settings for QoS Priority:

1st: Network Management Frames and Voice

2nd: Video and Music Streaming

3rd: Data Streaming

Thank you for purchasing a quality Rosewill Product.

Please register your product at: www.rosewill.com for complete warranty information and future support for your product.

Rosewill Customer Service Hotline: 1-800-575-9885

Rosewill Customer Service Support: techsupport@rosewill.com

-32-

Page 31 Page 33
Image 32
Page 31 Page 33
Contents RPLC-201P Contents Package Contents Expanding your Network with RPLC-201P Key FeaturesIntroduction to Hardware Application  Green Feature for Power saving mode Extra Power Outlet for more Convenience Hardware Diagram of RPLC-201P System RequirementReset/Security Color Behavior DescriptionRPLC-201PKIT Utility Installation Introduction to UtilityRPLC-201PKIT  Note RPLC-201PKIT RPLC-201PKIT RPLC-201PKIT RPLC-201PKIT Click Install to start installing Powerline Utility How to Use Powerline Utility Main Tab Note Mac Address PasswordDevice Name Change NPW Network Password Change Local NPW To remove a local device from its existing networkClick OK To add a local device into a networkFirmware Upgrade Click Firmware UpgradeScan Information TabAbout Tab Preferences How to Use the Security/Reset Pushbutton Forming a HomePlug AV logical networkScenario Forming a HomePlug AV logical networkJoining a Network Leaving a NetworkLeaving a network Appendix a Improving the Transmission Quality Appendix B Specifications Dimensions WeightTemperature ContentsAppendix C Acronyms and Abbreviations CCoDefault CAP Appendix D RPLC-201P QoS SupportCopyright & Trademarks Federal Communication Commission FCC Interference Statement
Top Page Image Contents