Roland MPX-50 user manual Setting Up and Connection, Install on a stable surface

Page 10

Part 1 What to Do Before Marking

Setting Up and Connection

Do not use with any power supply other than the dedicated AC adapter.

Use with any other power supply may lead to fire or electrocution.

Install on a stable surface.

Failure to do so may result in falling of the unit, leading to injury.

NOTICE

When moving the machine, as shown in the figure, do

 

not grasp the top portion.

 

Grip the bottom of the machine with both hands on the

 

left right.

To prevent accidents, do not install in any of the following types of areas.

Avoid use in areas subject to strong electric noise.

Avoid use in areas subject to high humidity or dust.

The MPX-50 generates heat when used, and should not be installed in an area with poor heat radiation characteristics.

Do not install in an area subject to strong vibration.

Use within a temperature range of 10 to 30° C (50 to 86° F) and within a humidity range of 35 to 80%.

Securely connect the power cord, computer I/O cable and so on so that they will not be unplugged and cause failure during operation. Doing so may lead to faulty operation or breakdown.

8

Image 10
Contents Model MPX-50 For the USA Table of Contents About and Notices About the SymbolsTo Ensure Safe Use Do not disassemble, repair, or modifyInstall on a stable surface Do not attempt to unplug the AC adapter with wet handsAbout the Labels Affixed to the Unit Model name Rating labelWhats Metaza? How Metaza WorksPart Names BaseChecking the Accessories PartSetting Up and Connection Metaza Installing the Software Installing the DriverMake sure the settings are correct Installing Dr. Metaza System requirementsDr. Metaza Settings Preparing the Workpiece for Marking Getting Ready to Perform MarkingConditions for materials that can be marked About the Marking Area Marking areaPreparing the Image Definition Bitmap Data and Vector DataLoading the Workpiece Part 2 Performing Marking Creating Marking Data Performing MarkingStarting Dr. Metaza Names and Functions of Dr. METAZAs Screen Items Decide on the Size and Shape of the Workpiece TipImport an Image Add Text Save the file Checking the Marking Results Before Marking Preview Starting Marking Stop Marking Driver Settings Part 2 Performing Marking Finishing Adding a Workpiece Shape Acquiring the Shape of a Workpiece with a ScannerCreating the Shape Using a Commercial Paint-type Program Part 3 Dr. Metaza Guide Trimming an Image Creating a Decorative Frame Around an Image Part 3 Dr. Metaza Guide Registering a Frequently Used Image Symbol Importing an Image from a Scanner Adding a Hand-drawn Image or Text Adding a Symbol Image Part 3 Dr. Metaza Guide Registering Your Own Original Frames Part 4 Maintenance Cleaning the Adhesive SheetCleaning the body and cover Replacing the HeadMetaza doesnt run when marking data is sent Dr.METAZA does not functionImages are unattractive -- faint images are dim Machining is performed, but marking is not possibleImages are unattractive -- dark all images are whitish Images are unattractive -- uneven Back Left Marked location isnt where desired Part 5 Troubleshooting Main Unit Specifications SpecificationsInterface Specifications Memo Roland License Agreement Coming into Force