Click [OK].
The [Print] dialog box appears again.
Click [Image Correction] tab.
Part 2 Performing Marking
3-3 Starting Marking
Operate Dr. METAZA to send marking data to Metaza.
If the power to Metaza is off, press the [STANDBY]
1 key to switch it on.
From the [File] menu, click [Print].
2 The [Print] dialog box appears.
Click the
3 [Roland METAZA
If this is already selected, then go on to the next step.
Click [Properties].
4 The [Roland METAZA
5
Click the
6 composition of the workpiece. In this example, choose [Brass].
7
Click [OK].
8 The marking data is sent to Metaza, and marking starts.
26