Part 2 Performing Marking
4. Finishing
When marking ends, remove the workpiece and switch off the power.
Grasp the base on both sides and pull back toward you
1 to remove.
Remove the workpiece from the base.
2 If the workpiece is difficult to detach, inserting a thin, flat object (such as a piece of sheet metal or a piece of stiff paper) between the adhesive sheet and the material may make the workpiece easier to remove.
3 | Loosen the screw. |
Load the base on the machine.
4 Slowly press it in inward until it makes contact.
5 Press the [STANDBY] key to switch off the power.
30