Roland MPX-50 user manual Creating the Shape Using a Commercial Paint-type Program

Page 34

Part 3 Dr. METAZA Guide

In the [Add Material] dialog box, for [Resolution],

5 enter the same value as the resolution you specified with the scanner driver when performing scanning.

6

7

Type a name of shape.

Use preview to check the shape of the workpiece, and if it's acceptable, click [Add].

Creating the Shape Using a Commercial Paint-type Program

You can use a commercial paint-type program to create a shape, then register it with Dr. METAZA.

Vector data cannot be used. Prepare bitmap data that meets the offer conditions.

Number of colors:	Binary (black and white)
	(Fill the interior of the shape with black, and make other portions white or uncolored.)
Resolution:	203 dpi is recommended.
	(When set at 203 dpi, the size specified with the commercial paint program is inherited by Dr. METAZA.
	You can specify the size when registering with Dr. METAZA, but in that case the shape is registered
	without changing the size.)
File format:	BMP or JPEG format

From the [File] menu, click [Add Material] - [File...].

1 The [Open] dialog box appears.

32

Image 34

Contents Model MPX-50 For the USA Table of Contents About and Notices About the SymbolsTo Ensure Safe Use Do not disassemble, repair, or modifyInstall on a stable surface Do not attempt to unplug the AC adapter with wet handsAbout the Labels Affixed to the Unit Model name Rating labelWhats Metaza? How Metaza WorksPart Names BaseChecking the Accessories PartSetting Up and Connection Metaza Installing the Software Installing the DriverMake sure the settings are correct Installing Dr. Metaza System requirementsDr. Metaza Settings Preparing the Workpiece for Marking Getting Ready to Perform MarkingConditions for materials that can be marked About the Marking Area Marking areaPreparing the Image Definition Bitmap Data and Vector DataLoading the Workpiece Part 2 Performing Marking Creating Marking Data Performing MarkingStarting Dr. Metaza Names and Functions of Dr. METAZAs Screen Items Decide on the Size and Shape of the Workpiece TipImport an Image Add Text Save the file Checking the Marking Results Before Marking Preview Starting Marking Stop Marking Driver Settings Part 2 Performing Marking Finishing Adding a Workpiece Shape Acquiring the Shape of a Workpiece with a ScannerCreating the Shape Using a Commercial Paint-type Program Part 3 Dr. Metaza Guide Trimming an Image Creating a Decorative Frame Around an Image Part 3 Dr. Metaza Guide Registering a Frequently Used Image Symbol Importing an Image from a Scanner Adding a Hand-drawn Image or Text Adding a Symbol Image Part 3 Dr. Metaza Guide Registering Your Own Original Frames Part 4 Maintenance Cleaning the Adhesive SheetCleaning the body and cover Replacing the HeadMetaza doesnt run when marking data is sent Dr.METAZA does not functionImages are unattractive -- faint images are dim Machining is performed, but marking is not possibleImages are unattractive -- dark all images are whitish Images are unattractive -- uneven Back Left Marked location isnt where desired Part 5 Troubleshooting Main Unit Specifications SpecificationsInterface Specifications Memo Roland License Agreement Coming into Force