PAgeoperatinghe derYOUR..... Breville product

using the puree DISC

When using the Puree Disc, puree will flow into the juice jug. There will be no pulp extracted into Pulp Container.

NOTE

SELF-RESET OVERHEATING PROTECTION The Breville juicer also fitted with a self-resetting safety device which safeguards against overheating on the motor with excessive loads. If overheating occurs, the juicer will automatically activate the overheating protection device and the motor will turn itself off. If this occurs, the light surrounding the StartStop button will flash red. When the overheating protection

is activated, unplug the juicer from power outlet for at least 15 minutes to allow the unit to cool. Then plug juicer into the power outlet and use as normal.

NOTE

ELECTRONIC PROTECTION The Breville juicer will automatically stop operating if the motor is stalled. This is an electronic safety feature. Either too much food is being processed at one time or the pieces are not small enough. Try trimming food, cutting food into smaller pieces of even size and/or processing a smaller amount per batch. If this occurs, the light surrounding the StartStop button will flash red. To continue juicing, turn the power OFF at the control panel, clear the feed chute, finally turn the appliance back on by pressing the StartStop button to ON.

NOTE

OVERLOAD PROTECTION BUTTON The Breville juicer is fitted with

a safety device which safeguards against overloading with excessive loads. If this occurs, juicer will automatically activate the overload protection button and the unit will turn itself off. If this occurs, remove the plug from the outlet and allow the unit to cool. Then press the Overload Protection Button found on the bottom of the Motor Base. The safety device will then be reset and the Breville juicer is ready for use again.

17

Page 17
Image 17
Breville BJE820XL, the Juice Fountain Duo manual Using the puree Disc