Breville BJE820XL, the Juice Fountain Duo manual Juice leaks between

TROUBLESHOOTING

pOSSIBLE PROBLEM	EASY SOLUTION
Juice leaks between the	• Try a slower juicing action by pushing the food pusher
rim of the Juicer Cover	down slower. Fruit and vegetables with a high water
and the Filter Bowl	content (tomatoes and watermelon) should be juiced on
Surround	low speed or by using the Puree Disc.
Juice sprays out too fast	• Try a slower juicing action by pushing the food pusher
from Juice Spout	down slower.
When using Puree Disc	• Try using fruits with more water content to help flush
the Filter Bowl Surround	through the contents. Additionally, try a slower juicing
becomes full and clogs the	action by feeding one piece in at a time and by pushing
spout on the Filter Bowl	the food pusher down more slowly.
Surround.
Juicer suddenly turns off	• The juicer has been stressed by overloading or stalling.
during juicing	Juicer will automatically activate the overload protection
	button and the unit will turn itself off. When this
	happens it is recommended that the unit is turned off
	and unplugged. Then press the Overload Protection
	Button found on the bottom of the Motor Base. The
	safety device will then be reset and the Breville juicer is
	ready for use again.
Red light flashing	• This may indicate that the motor has been stressed by
	Overheating with excessive load. The Juicer is fitted
	with a self-resetting safety device which safeguards
	against overheating on the motor with excessive loads.
	If overheating occurs, the juicer will automatically
	activate the overheating protection device and the motor
	will turn itself off. When the overheating protection is
	activated, unplug the juicer from power outlet for at least
	15 minutes to allow the unit to cool. Then plug juicer
	into the power outlet and use as normal.
	• The Juicer will automatically stop operating if the
	motor is stalled. If this occurs, the light surrounding
	the StartStop button will flash red. This is an electronic
	safety feature. Either too much food is being processed
	at one time or the pieces are not small enough. Try
	trimming food, cutting food into smaller pieces of even
	size and/or processing a smaller amount per batch. To
	continue juicing, unplug the juicer from power outlet,
	reset the Juicer by pressing the StartStop button to
	OFF, then clear the feed chute, plug the juicer in and
	finally turn the appliance back on by pressing the
	StartStop button to ON.

27