PAgeoperatinghe derYOUR..... Breville product

with the juice Nutri Disc™ or puree Disc

1.Wash your selection of fruit and/or vegetables to prepare them for juicing.

WARNING

Do not put hard fruit and vegetables (ie. Carrots , apples , fresh beetroot , etc.) or ice through juicer when using Puree Disc. This could damage parts of the unit.

2.Ensure the juicer is correctly assembled

– see assembling instructions. Ensure the Nutri Disc™ or Puree Disc is thoroughly cleaned before each use. Ensure you place the Juice Jug (or glass) under spout before commencing juicing.

3.Plug the power cord into a 110/120V power outlet. The light surrounding the ‘Start Stop” button will illuminate.

NOTE

The light will be illuminated for 2 minutes before fading into sleep mode. The light will come back on by activating any of the controls.

4.Use the speed selector table as a guide for juicing different fruit and vegetables. Push the “Start Stop” button and the Juicer will automatically start.

5.With the motor running, place food into the Feed Chute using the Food Pusher, gently guide food down the Feed Chute. Do not exert excess pressure. To extract the maximum amount of juice, always push the Food Pusher down slowly.

6.As fruits and vegetables are processed juice will flow into the juice jug and the separated pulp will accumulate in the Pulp Container. The Pulp Container can be emptied during juicing by turning the juicer OFF at the control panel and then carefully removing the Pulp Container. Replace the empty Pulp Container into position before continuing to juice.

NOTE

Do not allow the Pulp Container to over fill as this may affect the operation of the appliance.

NOTE

To minimize cleaning, line the pulp container with a produce bag to collect the pulp. Pulp can be used in other dishes, or as a compost for the garden or discarded.

16

Page 16
Image 16
Breville the Juice Fountain Duo PAgeoperatinghe derYOUR..... Breville product, With the juice Nutri Disc or puree Disc