Starting computer number (Default: 1)
The “Starting computer number” defines to the system, the first CPU port number for a particular UltraMatrix switch that is configured in an expanded topology. (See page 15)
Switch #1’s starting computer number is always 1.
Switch #2’s number is the total RS232 ports on Unit #1 times 4 + 1. Switch #3’s number is the total RS232 ports on Unit #1 and Unit #2 times 4 + 1 and so forth.
To enter the “Starting computer” number use the up/down arrow keys and select “Starting computer number” and press [Enter]. An input box will display for a new starting computer number. Enter the new “Starting computer” number and press [Enter].
Maximum computers (Default: 64)
The “Maximum computers” value is calculated by multiplying the number of RS232 ports on all switches by 4. This value must be entered from KVM station #1 before all Units are connected in an expansion topology. When saved, this value is propagated to all connected Units. To enter the “Maximum computers” value, select it and press [Enter]. An input box will display to enter the maximum computers value. Type in the new value and press [Enter].
“Keyboard settings” selections.
PC keyboard rate (chars/sec) (Default: 20)
This option adjusts the KVM keyboard action when you hold down a key to repeat a single character. Valid inputs are
PC keyboard delay (Default: Fast)
This option adjusts the delay between when a key is pressed and held and when it begins to send repeated characters to the selected computer.
The options are:
Slow
Medium
Fast
Fastest
ULTRAMATRIX E-SERIES MANUAL
29