Keyboard (Default: PC mode 2)
To change the keyboard type for a selected computer or configure the CPU port for a serial device, use the up/down arrow keys to select the computer whose keyboard needs changing. Use the right arrow key to select the keyboard field and press [Enter]. A selection box will display listing the supported keyboard types and serial support options. Use the up/down arrow keys to select the keyboard type or serial support needed for the selected computer and press [Enter]. The choices are:
PC1: Supports most IBM compatible PCs, PS/2 models, and PCs that do not use PC mode 2.
PC2: Supports most PCs.
PC3: Supports Unix workstations and servers, IBM RS/6000, SGI, HP700 or 9000 series, DEC Alpha®, or other computers.
Sun: Supports Sun systems*
Serial 9600,N,8,1: Serial support @ 9600 Baud rate*
Serial 4800,N,8,1: Serial support @ 4800 Baud rate*
Serial 2400,N,8,1: Serial support @ 2400 Baud rate*
Serial 1200,N,8,1: Serial support @ 1200 Baud rate*
Serial | 600,N,8,1: | Serial support @ 600 Baud rate* | |
Serial | 300,N,8,1: | Serial support @ 300 Baud rate* | |
Serial | 110,N,8,1: | Serial support @ 110 Baud rate* | |
Serial | 50,N,8,1: | Serial support @ 50 Baud rate* |
* Available on
Mouse (Default: PS/2)
To change the mouse type for a selected computer, use the up/down arrow keys to select the computer whose mouse needs changing. Use the right arrow keys to select the mouse field and press [Enter]. A selection box will display listing the supported mouse types. Use the up/down arrow keys to select the correct mouse type for the selected computer and press [Enter]. The supported mouse types are:
PS/2 -
PS/2 wheel - incorporates a small wheel for special functions.
Serial
Serial
Note: If you set the mouse to PS/2 and the CPUs operating system is capable of supporting a wheel mouse, the mouse type will automatically be changed to PS/2 wheel.
ULTRAMATRIX E-SERIES MANUAL
33