Rose electronic CAT5 Troubleshooting, PC boots with no error messages but keyboard does not work

Page 24
TROUBLESHOOTING

TROUBLESHOOTING

Troubleshooting

The troubleshooting section is used as a guide to understanding the capabilities of the CrystalView Pro CAT5 and for general troubleshooting. If you have any problems or questions concerning the installation, operation or usage of the CrystalView Pro CAT5 that is not covered in this manual, please contact Rose Electronics for technical support.

PC boots with no error messages but keyboard does not work.

„Cable is loose; re-seat keyboard cable at the CPU and the transmitter.

„Keyboard and mouse cables reversed.

„Try a different model of keyboard. If the new keyboard works, the original one may not be compatible. Some older auto-sensing keyboards may not work with this product.

Wrong or missing characters from those typed.

„Power down and reboot the system.

PS/2 cursor appears on the screen, but mouse doesn’t work.

„Cable is loose, re-seat the mouse cable

„Keyboard and mouse cables reversed.

„Try a different model of mouse.

„Power off and on the Unit

System does not detect PS/2 mouse or application cannot find mouse.

„Keyboard and mouse cables reversed.

„Cable is loose; re-seat mouse cable on the CPU and transmitter.

„Reboot PC.

Keyboard and Mouse have locked up.

„Reset PC and the receiver Unit.

„Check power to the receiver Unit.

No picture

„The CAT5 cable is not connected at the transmitter and/or the receiver unit.

Horizontal jittering in picture

„Phase adjustment incorrect, manually or auto-detect the phase setting. (See Figure 6)

 

20

 

CRYSTALVIEW PRO CAT5 INSTALLATION AND OPERATIONS MANUAL

 

 

 

 

Page 23 Page 25
Image 24
Page 23 Page 25
Contents 10707 Stancliff Road Phone 281Houston, Texas INSTALLATION AND OPERATIONS MANUALLIMITED WARRANTY FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO-FREQUENCY INTERFERENCE STATEMENTSCE DECLARATION OF CONFORMITY FCC/IC STATEMENTS, EU DECLARATION OF CONFORMITYTABLE OF CONTENTS ContentsFigures TablesINTRODUCTION DisclaimerSystem introduction Features CompatibilityPackage contents DVI or VGAReceiver Transmitter Local KVM access Transmitter No local KVM access ConnectorsMODELS PC modelRack model CrystalView Pro CAT5 to Rose switch cable CABLESCrystalView Pro CAT5 cables Transmitter unit to CPU cableON-SCREEN DISPLAY OSD Device Control - OSDSelect graphic source menu The brightness / contrast menu enables you to adjust Figure 5. Color / Color temp menu Figure 6. Image menu Figure 7. Tools menu Manually adjust the OSD No auto-detection of pixels and phase INSTALLATION InstallationTransmitter to Receiver cabling Cable typeMaximum distance CAT-5SET-UP instructions Mixed DVI and VGA Pixel clock set correctly Applying power Operating instructions - Local KVM access OPERATING INSTRUCTIONSOperating instructions Frame RatesTROUBLESHOOTING TroubleshootingPC boots with no error messages but keyboard does not work Wrong or missing characters from those typedSmeared characters SERVICE Service InformationMaintenance and Repair Technical SupportSAFETY SafetySafety and EMC Regulatory Statements Safety information GroundingServicing Appendix A. General specifications APPENDICESAppendix C. Firmware updates Appendix B. Parts and cablesPart Number DescriptionAppendix D. Rack mount instructions Appendix E. Rack mount illustration10707 Stancliff Road Phone 281Houston, Texas
Top Page Image Contents