Rose electronic CrystalView Plus manual Limited Warranty

Page 2

LIMITED WARRANTY

Rose Electronics® warrants the CrystalView Plus™ to be in good working order for one year from the date of purchase from Rose Electronics or an authorized dealer. Should this product fail to be in good working order at any time during this one-year warranty period, Rose Electronics will, at its option, repair or replace the Unit as set forth below. Repair parts and replacement units will be either reconditioned or new. All replaced parts become the property of Rose Electronics. This limited warranty does not include service to repair damage to the Unit resulting from accident, disaster, abuse, or unauthorized modification of the Unit, including static discharge and power surges.

Limited Warranty service may be obtained by delivering this unit during the one-year warranty period to Rose Electronics or an authorized repair center providing a proof of purchase date. If this Unit is delivered by mail, you agree to insure the Unit or assume the risk of loss or damage in transit, to prepay shipping charges to the warranty service location, and to use the original shipping container or its equivalent. You must call for a return authorization number first. Under no circumstances will a unit be accepted without a return authorization number. Contact an authorized repair center or Rose Electronics for further information.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTIED ABOVE, YOUR SOLE REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL ROSE ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR THE INABILITY TO USE SUCH PRODUCT, EVEN IF ROSE ELECTRONICS OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

IBM, AT, and PS/2 are trademarks of International Business Machines Corp. Microsoft and Microsoft Windows are registered trademarks of Microsoft Corp. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owner.

Copyright Rose Electronics 2004. All rights reserved.

No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any means, electronic or mechanical, including photocopying and recording, without the prior written permission of Rose Electronics.

Rose Electronics Part # MAN-CRVP

Printed In the United States of America - Revision 1.5

Page 1 Page 3
Image 2
Page 1 Page 3
Contents CrystalView Plus Limited Warranty FCC/IC STATEMENTS, EU Declaration of Conformity Page Table of Contents Figures System introduction IntroductionDisclaimer Features Rose Electronics web site About this manual Package contentsCompatibility Models Single video Local modelsRear remote with serial/audio Single video Remote modelsRear Remote DB9MDB25F Dual video local modelsRear Local Rear Local with serial/audioDual video remote models Dual video Remote modelsQuad video remote models Quad video Remote modelsCables CablesAudio cable Do not Install the MIC JumperSerial cable Installation InstallationLocal unit to CPU cabling Connecting the cablesLocal KVM access models Serial/audio modelsLocal unit to Remote unit cabling Do not Install the MIC Jumper if Using a Powered MicrophoneRemote unit to KVM station cabling Serial portDual Video cabling Dual video cablingRemote unit to KVM station cabling Quad Video Remote Unit cabling All models Connecting to a Rose KVM switchApplying power Command Key Sequence Keyboard CommandsKeyboard commands Exit Command mode without saving L-Shift + ESC Keyboard command descriptionsExit Command mode and save Esc Select Channel 1Previous Assisted EQ setting L-Ctrl + PgDn Reset EQ & Delay values L-Ctrl + HomeNext Assisted EQ setting L-Ctrl + PgUp Increase RED delay R + R-ArrowToggle Blue delay L-Ctrl + B Toggle RED delay L-Ctrl + RToggle Green delay L-Ctrl + G Increase LF EQ Course L + Up ArrowReset to factory defaults L-Ctrl + F9 Local unit Keyboard commands Dual local model onlyReset keyboard and mouse F1 Toggle Unit Private Mode Scroll LockReset the local keyboard and mouse Send Null mouse byteRED Green Blue Video AdjustmentsAdjusting the video HF / LF adjustment guide Blue Operating Instructions KVM SwitchingPrivate mode Dual access models only Operating instructions- All unitsTroubleshooting TroubleshootingOnly video is required, but no picture appears Keyboard error on boot-upNo sound at the Remote Units speakers or headphones System does not detect a PS/2 mouseTechnical Support Service InformationMaintenance and Repair Safety SafetyServicing Safety and EMC Regulatory StatementsGrounding Appendix A. General specifications AppendicesCrystalview Plus Installation and Operations Manual Appendix B. Parts and cables Part Number DescriptionAppendix C. Rack mount instructions Appendix D. Rack mount illustration Appendix E. Quick Installation/Setup Guide Crystalview Plus Installation and Operations Manual Crystalview Plus Installation and Operations Manual Page Stancliff Road Houston, Texas Phone 281

CrystalView Plus specifications

The Rose Electronic CrystalView Plus is a state-of-the-art KVM (Keyboard, Video, Mouse) switch that is designed to streamline the control of multiple computers from a single workstation. This sophisticated device is particularly beneficial in environments such as data centers, control rooms, and server management operations, where efficiency and space utilization are paramount.

One of the standout features of the CrystalView Plus is its ability to support a wide range of platforms, including Windows, macOS, and Linux. This versatility means that users can seamlessly switch between different systems without the need for additional adapters or cables. The CrystalView Plus also supports multiple video resolutions up to 4K, ensuring high-quality visuals that enhance the user experience, especially for those working with graphics-intensive applications.

The CrystalView Plus employs advanced technologies to ensure reliability and performance. With its innovative autosensing technology, the device automatically detects connected computers and optimally configures the necessary settings, making it user-friendly even for those who are not technically inclined. Additionally, the KVM switch features a hotkey switching function that allows users to toggle between computers quickly and efficiently, saving valuable time during critical tasks.

The device is built with robust construction that ensures durability and longevity in demanding environments. Its compact design allows for easy integration into existing setups, minimizing the footprint without compromising on functionality. With support for both USB 2.0 and USB 3.0 devices, users can conveniently connect peripherals such as external hard drives, printers, and scanners, enhancing productivity by allowing access to various resources from one central location.

Security is another critical aspect of the CrystalView Plus, as it isolates computer systems from each other, preventing unauthorized access and potential data breaches. This feature is incredibly important in sensitive environments where data integrity and confidentiality are crucial.

In terms of connectivity, the CrystalView Plus includes multiple input/output options and supports both VGA and HDMI connections, catering to a range of user needs. The intuitive LED indicators provide real-time status updates for connected systems, allowing users to monitor their setup at a glance.

In summary, the Rose Electronic CrystalView Plus KVM switch stands out due to its user-friendly design, high compatibility with various operating systems, superior video quality, and robust security features. This makes it an ideal solution for anyone looking to enhance their operational efficiency in managing multiple computer systems.
Top Page Image Contents