Rose electronic CrystalView Plus manual Operating Instructions, Operating instructions- All units

Page 33

OPERATING INSTRUCTIONS

Operating instructions- All units

Once the Remote and Local Units are connected and configured, the Remote KVM station’s keyboard, video monitor and mouse will function as if it were directly connected to the CPU. All applications, upgrades and PC configurations can be performed normally.

Each Rj45 connector on the remote unit has two LEDs. The left LED is yellow, the right one is green. The green LED on all channels will flash if a video signal is being received from the local unit. If no video signal is being received, the green LED will remain “ON”. The yellow LED on channel one only will flash indicating that the keyboard and mouse are active. The video from all sources will always display on their respective monitor unless the unit is in the private mode (Dual and Quad models only).

Operating instructions – Dual unit

KVM Switching

The CrystalView Plus “Dual” version allows for an additional KVM station to be connected to the Local Unit. The CPU can be operated from either the Remote or Local KVM station but not simultaneously. The Local Unit is active during boot-up. To activate the Remote KVM station, simply press any key on the Remote KVM stations keyboard or move the mouse. To activate the Local KVM station, press any key on the Local KVM station’s keyboard or move its mouse. Both the local and remote monitors will display the current computer activity unless a unit is in the private mode.

A lockout feature disables activity from a KVM station until the “In Use” KVM stations keyboard or mouse is inactive for more than 2 seconds. After 2 seconds of inactivity, pressing any key on the “Not in Use” KVMs keyboard or moving the mouse will activate that KVM station and lockout the other KVM station.

Private mode (Dual access models only)

The private mode feature will disable the keyboard and mouse and blank the video monitor on the Remote or Local Unit. To enter the private mode, execute the command shown in Table 3.

 

Unit

Command

 

 

 

 

Remote

[L-Ctrl] + [L-Shift] + [F10] / [Scroll Lock]

 

 

 

 

 

 

 

 

 

 

Local

[“HOT-KEY”] + [Scroll Lock]

 

 

 

 

 

(Default “HOT-KEY” = Right Ctrl key)

 

 

 

 

 

 

 

 

Table 3. Private mode commands

 

 

 

 

 

 

 

 

 

 

 

CRYSTALVIEW PLUS INSTALLATION AND OPERATIONS MANUAL

 

27

 

 

 

 

 

 

 

 

Page 32 Page 34
Image 33
Page 32 Page 34
Contents CrystalView Plus Limited Warranty FCC/IC STATEMENTS, EU Declaration of Conformity Page Table of Contents Figures Introduction DisclaimerSystem introduction Features Package contents CompatibilityRose Electronics web site About this manual Single video Local models ModelsRear Remote Single video Remote modelsRear remote with serial/audio DB9MRear Local Dual video local modelsDB25F Rear Local with serial/audioDual video Remote models Dual video remote modelsQuad video Remote models Quad video remote modelsCables CablesDo not Install the MIC Jumper Serial cableAudio cable Installation InstallationLocal KVM access models Connecting the cablesLocal unit to CPU cabling Serial/audio modelsRemote unit to KVM station cabling Do not Install the MIC Jumper if Using a Powered MicrophoneLocal unit to Remote unit cabling Serial portDual video cabling Dual Video cablingRemote unit to KVM station cabling Quad Video Remote Unit cabling Connecting to a Rose KVM switch Applying powerAll models Keyboard Commands Keyboard commandsCommand Key Sequence Exit Command mode and save Esc Keyboard command descriptionsExit Command mode without saving L-Shift + ESC Select Channel 1Next Assisted EQ setting L-Ctrl + PgUp Reset EQ & Delay values L-Ctrl + HomePrevious Assisted EQ setting L-Ctrl + PgDn Increase RED delay R + R-ArrowToggle Green delay L-Ctrl + G Toggle RED delay L-Ctrl + RToggle Blue delay L-Ctrl + B Increase LF EQ Course L + Up ArrowReset keyboard and mouse F1 Local unit Keyboard commands Dual local model onlyReset to factory defaults L-Ctrl + F9 Toggle Unit Private Mode Scroll LockSend Null mouse byte Reset the local keyboard and mouseVideo Adjustments Adjusting the videoRED Green Blue HF / LF adjustment guide Blue Private mode Dual access models only KVM SwitchingOperating Instructions Operating instructions- All unitsTroubleshooting TroubleshootingNo sound at the Remote Units speakers or headphones Keyboard error on boot-upOnly video is required, but no picture appears System does not detect a PS/2 mouseService Information Maintenance and RepairTechnical Support Safety SafetySafety and EMC Regulatory Statements GroundingServicing Appendices Appendix A. General specificationsCrystalview Plus Installation and Operations Manual Part Number Description Appendix B. Parts and cablesAppendix C. Rack mount instructions Appendix D. Rack mount illustration Appendix E. Quick Installation/Setup Guide Crystalview Plus Installation and Operations Manual Crystalview Plus Installation and Operations Manual Page Stancliff Road Houston, Texas Phone 281

CrystalView Plus specifications

The Rose Electronic CrystalView Plus is a state-of-the-art KVM (Keyboard, Video, Mouse) switch that is designed to streamline the control of multiple computers from a single workstation. This sophisticated device is particularly beneficial in environments such as data centers, control rooms, and server management operations, where efficiency and space utilization are paramount.

One of the standout features of the CrystalView Plus is its ability to support a wide range of platforms, including Windows, macOS, and Linux. This versatility means that users can seamlessly switch between different systems without the need for additional adapters or cables. The CrystalView Plus also supports multiple video resolutions up to 4K, ensuring high-quality visuals that enhance the user experience, especially for those working with graphics-intensive applications.

The CrystalView Plus employs advanced technologies to ensure reliability and performance. With its innovative autosensing technology, the device automatically detects connected computers and optimally configures the necessary settings, making it user-friendly even for those who are not technically inclined. Additionally, the KVM switch features a hotkey switching function that allows users to toggle between computers quickly and efficiently, saving valuable time during critical tasks.

The device is built with robust construction that ensures durability and longevity in demanding environments. Its compact design allows for easy integration into existing setups, minimizing the footprint without compromising on functionality. With support for both USB 2.0 and USB 3.0 devices, users can conveniently connect peripherals such as external hard drives, printers, and scanners, enhancing productivity by allowing access to various resources from one central location.

Security is another critical aspect of the CrystalView Plus, as it isolates computer systems from each other, preventing unauthorized access and potential data breaches. This feature is incredibly important in sensitive environments where data integrity and confidentiality are crucial.

In terms of connectivity, the CrystalView Plus includes multiple input/output options and supports both VGA and HDMI connections, catering to a range of user needs. The intuitive LED indicators provide real-time status updates for connected systems, allowing users to monitor their setup at a glance.

In summary, the Rose Electronic CrystalView Plus KVM switch stands out due to its user-friendly design, high compatibility with various operating systems, superior video quality, and robust security features. This makes it an ideal solution for anyone looking to enhance their operational efficiency in managing multiple computer systems.
Top Page Image Contents