Rose electronic CrystalView Plus manual Appendix C. Rack mount instructions

Page 42

Appendix C. Rack mount instructions

The optional rack mount kit includes the following items:

nTwo black anodized mounting brackets or 3 unit mounting shelf.

n6 - 32 x 3/8” flat head mounting screws.

To rack mount a single unit, attach the two rack mounting brackets to your Unit with the short flange against the Unit or mount up to three units on the Rackmount shelf. Do not over tighten the screws used to mount the Unit to the mounting brackets or shelf. Use only the hardware provided, using hardware other than that provided could cause damage to the electronics and/or result in loss of mounting integrity. Secure the mounting brackets or the shelf to the rack using the appropriate size bolts, nuts and lock washers.

The following guidelines should be observed when installing.

a). Do not exceed the operating temperature of 0ο C to 40ο C. b). Do not block power supply vents or restrict airflow.

c). Mechanical loading of the rack should be considered to prevent instability and possible tipping over.

d). Tighten all connectors securely and provide adequate strain relief for all cables.

e). Provide a grounded power source to all Units. Pay special attention to overall branch circuit load ratings before connecting equipment to this source. Overloaded circuits are potential fire hazards and can cause equipment failures or poor performance.

36CRYSTALVIEW PLUS INSTALLATION AND OPERATIONS MANUAL

Page 41 Page 43
Image 42
Page 41 Page 43
Contents CrystalView Plus Limited Warranty FCC/IC STATEMENTS, EU Declaration of Conformity Page Table of Contents Figures Introduction DisclaimerSystem introduction Features Package contents CompatibilityRose Electronics web site About this manual Models Single video Local modelsRear remote with serial/audio Single video Remote modelsRear Remote DB9MDB25F Dual video local modelsRear Local Rear Local with serial/audioDual video remote models Dual video Remote modelsQuad video remote models Quad video Remote modelsCables CablesDo not Install the MIC Jumper Serial cableAudio cable Installation InstallationLocal unit to CPU cabling Connecting the cablesLocal KVM access models Serial/audio modelsLocal unit to Remote unit cabling Do not Install the MIC Jumper if Using a Powered MicrophoneRemote unit to KVM station cabling Serial portDual Video cabling Dual video cablingRemote unit to KVM station cabling Quad Video Remote Unit cabling Connecting to a Rose KVM switch Applying powerAll models Keyboard Commands Keyboard commandsCommand Key Sequence Exit Command mode without saving L-Shift + ESC Keyboard command descriptionsExit Command mode and save Esc Select Channel 1Previous Assisted EQ setting L-Ctrl + PgDn Reset EQ & Delay values L-Ctrl + HomeNext Assisted EQ setting L-Ctrl + PgUp Increase RED delay R + R-ArrowToggle Blue delay L-Ctrl + B Toggle RED delay L-Ctrl + RToggle Green delay L-Ctrl + G Increase LF EQ Course L + Up ArrowReset to factory defaults L-Ctrl + F9 Local unit Keyboard commands Dual local model onlyReset keyboard and mouse F1 Toggle Unit Private Mode Scroll LockReset the local keyboard and mouse Send Null mouse byteVideo Adjustments Adjusting the videoRED Green Blue HF / LF adjustment guide Blue Operating Instructions KVM SwitchingPrivate mode Dual access models only Operating instructions- All unitsTroubleshooting TroubleshootingOnly video is required, but no picture appears Keyboard error on boot-upNo sound at the Remote Units speakers or headphones System does not detect a PS/2 mouseService Information Maintenance and RepairTechnical Support Safety SafetySafety and EMC Regulatory Statements GroundingServicing Appendix A. General specifications AppendicesCrystalview Plus Installation and Operations Manual Appendix B. Parts and cables Part Number DescriptionAppendix C. Rack mount instructions Appendix D. Rack mount illustration Appendix E. Quick Installation/Setup Guide Crystalview Plus Installation and Operations Manual Crystalview Plus Installation and Operations Manual Page Stancliff Road Houston, Texas Phone 281

CrystalView Plus specifications

The Rose Electronic CrystalView Plus is a state-of-the-art KVM (Keyboard, Video, Mouse) switch that is designed to streamline the control of multiple computers from a single workstation. This sophisticated device is particularly beneficial in environments such as data centers, control rooms, and server management operations, where efficiency and space utilization are paramount.

One of the standout features of the CrystalView Plus is its ability to support a wide range of platforms, including Windows, macOS, and Linux. This versatility means that users can seamlessly switch between different systems without the need for additional adapters or cables. The CrystalView Plus also supports multiple video resolutions up to 4K, ensuring high-quality visuals that enhance the user experience, especially for those working with graphics-intensive applications.

The CrystalView Plus employs advanced technologies to ensure reliability and performance. With its innovative autosensing technology, the device automatically detects connected computers and optimally configures the necessary settings, making it user-friendly even for those who are not technically inclined. Additionally, the KVM switch features a hotkey switching function that allows users to toggle between computers quickly and efficiently, saving valuable time during critical tasks.

The device is built with robust construction that ensures durability and longevity in demanding environments. Its compact design allows for easy integration into existing setups, minimizing the footprint without compromising on functionality. With support for both USB 2.0 and USB 3.0 devices, users can conveniently connect peripherals such as external hard drives, printers, and scanners, enhancing productivity by allowing access to various resources from one central location.

Security is another critical aspect of the CrystalView Plus, as it isolates computer systems from each other, preventing unauthorized access and potential data breaches. This feature is incredibly important in sensitive environments where data integrity and confidentiality are crucial.

In terms of connectivity, the CrystalView Plus includes multiple input/output options and supports both VGA and HDMI connections, catering to a range of user needs. The intuitive LED indicators provide real-time status updates for connected systems, allowing users to monitor their setup at a glance.

In summary, the Rose Electronic CrystalView Plus KVM switch stands out due to its user-friendly design, high compatibility with various operating systems, superior video quality, and robust security features. This makes it an ideal solution for anyone looking to enhance their operational efficiency in managing multiple computer systems.
Top Page Image Contents